YUst Elmar-YAan Elmarovich. Calculation and designing laminose wooden giparov . 0000
Calculation and designing laminose wooden giparov: ooze RSL of OD 61:85-5/3993
Other dissertations on discipline Building designs, buildings and constructions:
- Strukov Sergey Aleksandrovich. the Method of an estimation of a slipperiness of designs of floors with various sorts of coatings - 2009
Method of an estimation of a slipperiness of designs of floors with various sorts of coatings: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Strukov Sergey Aleksandrovich; [a protection Place: the Center. nauch.-issled. And the project. In inhabited and societies. Buildings]. Moscow, 2009.92 p.: ooze. RSL OD, 61 09-5/1324 - Makarov Aleksandr Mihaylovich. the Estimation of a noise mode at designing shumozashchity in process buildings with premises of the difficult form and the process equipment - 2009
An estimation of a noise mode at designing shumozashchity in process buildings with premises of the difficult form and the process equipment: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Makarov Alexander Mihajlovich; [a protection Place: Nauch.-issled. In builds. Physicists of Dews. akad. Architecture also builds. Sciences]. Moscow, 2009.190 p.: ooze. RSL OD, 61 09-5/890
- Turkov Andrey Viktorovich. Interrelation of problems of dynamics and a statics of solid and integral wood structures - 2008
Interrelation of problems of dynamics and a statics of solid and integral wood structures: the dissertation... Dr.Sci.Tech.: 05.23.01 / Turks Andrey Viktorovich; [a protection Place: GOUVPO "the Oryol state technical university"]. - the Eagle, 2008. - 341 p.: 45 ooze. - Blinnikov Evgeniy Aleksandrovich. the Deformation property of integral reinforced-concrete elements at skew vnetcentrennom compression - 2008
A deformation property of integral reinforced-concrete elements at skew vnetcentrennom compression: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Blinnikov Evgenie Aleksandrovich; [a protection Place: Eagles. gos. tehn. Un y]. - an eagle, 2008. - 165 p.: ooze. RSL OD, 61:08-5/102
- Skobeleva Elena Anatolevna. the Warping of prestressed reinforced-concrete bent elements of integral sectional view - 2008
A warping of prestressed reinforced-concrete bent elements of integral sectional view: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Skobelev Elena Anatolevna; [a protection Place: Eagles. gos. tehn. Un y]. eagle, 2008.208 p.: ooze. RSL OD, 61 09-5/1013 - SHehovtcov Aleksey Sergeevich. Research of the is intense-deformed condition of the is compressed-bent bearing rod elements of wooden mesh domes and perfection of their central connections - 2008
Research of the is intense-deformed condition of the is compressed-bent bearing rod elements of wooden mesh domes and perfection of their central connections: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Shehovtsov Alexey Sergeevich; [a protection Place: S.-Peterb. gos. Arhitektur.-builds. Un y]. - St.-Petersburg, 2008.152 p.: ooze. RSL OD, 61 09-5/864 - Fridkin Vladimir Morduhovich. Methodological approaches to working out of constructive forms wide-span and sverhprotjazhennyh engineering constructions - 2008
Methodological approaches to working out of constructive forms wide-span and sverhprotjazhennyh engineering constructions: the dissertation... Dr.Sci.Tech.: 05.23.01 / Fridkin Vladimir Morduhovich; [a protection Place: Joint-Stock Company "Central research and project institute of building metalworks"]. - Moscow, 2008. - 382 p.: 52 ooze. - YUrchenko Andrey Anatolevich. The is intense-deformed condition of girders of the closed sectional view with the punched walls - 2008
The is intense-deformed condition of girders of the closed sectional view with the punched walls: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Jurchenko Andrey Anatolevich; [a protection Place: Sib. feder. Un y]. Krasnoyarsk, 2008.166 p.: ooze. RSL OD, 61 09-5/117 - Plotnikova Olga Serafimovna. Definition of reliability of metal designs as a part of buildings and constructions at the restrained statistical information on controllable parametres - 2008
Definition of reliability of metal designs as a part of buildings and constructions at the restrained statistical information on controllable parametres: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Plotnikova Olga Serafimovna; [a protection Place: S.-Peterb. gos. Arhitektur.-builds. Un y]. Vologda, 2008.241 p.: ooze. RSL OD, 61 09-5/419 - Mihaylova Natalyа Sergeevna. Features of a warping of reinforced concrete beams with the organised cracks - 2008
Features of a warping of reinforced concrete beams with the organised cracks: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Mihajlova Natalia Sergeevna; [a protection Place: Sib. feder. Un y]. - Novosibirsk, 2008. - 294 p.: ooze. RSL OD, 61:08-5/956 - Gvozkov Pavel Aleksandrovich. the Estimation of rigidness integral wooden and derevometallicheskih girders a vibrating method - 2008
An estimation of rigidness integral wooden and derevometallicheskih girders a vibrating method: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Gvozkov Paul Aleksandrovich; [a protection Place: Eagles. gos. tehn. Un y]. - an eagle, 2008. - 155 p.: ooze. RSL OD, 61:08-5/109 - Horoshilova Anna Nikolaevna. Durability of reinforced-concrete columns at explosive and numerous shock loads - 2008
Durability of reinforced-concrete columns at explosive and numerous shock loads: the dissertation... A Cand.Tech.Sci.: 05.23.01, 05.23.17 / Horoshilova Anna Nikolaevna; [a protection Place: Volume. gos. Arhitektur.-builds. Un y]. Tomsk, 2008.165 p.: ooze. RSL OD, 61 09-5/747 - CHaganov Aleksey Borisovich. Durability and rigidness of reinforced-concrete ridge slabs with infringement of cohesion of armature with concrete - 2008
Durability and rigidness of reinforced-concrete ridge slabs with infringement of cohesion of armature with concrete: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Chaganov Alexey Borisovich; [a protection Place: the Center. nauch.-issled. And the project. In inhabited and societies. Buildings]. - Moscow, 2008. - 158 p.: ooze. + enc. (159-249 p.: ooze.) . RSL OD, 61:08-5/593 - SHkutov Aleksandr Sergeevich. Durability of panels of wall with technological apertures at joint action of vertical and horizontal forces - 2008
Durability of panels of wall with technological apertures at joint action of vertical and horizontal forces: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Shkutov Alexander Sergeevich; [a protection Place: Penz. gos. Un y architecture and str-va]. - Penza, 2008. - 229 p.: ooze. RSL OD, 61:08-5/298 - Aldushkin Roman Vladimirovich. Development and perfection of rational methods of strengthening and regulation of efforts in metal designs balochnogo a type and trusses - 2008
Development and perfection of rational methods of strengthening and regulation of efforts in metal designs balochnogo a type and trusses: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Aldushkin the Novel Vladimirovich; [a protection Place: Eagles. gos. tehn. Un y]. eagle, 2008.175 p.: ooze. RSL OD, 61 09-5/37 - Tisevich Evgeniy Valerevich. Is compressed-bent kleefanernye panel of wall with a sheet work, The design included in general work - 2008
Is compressed-bent kleefanernye panels of wall with a sheet work included in general work of a design: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Tisevich Evgenie Valerevich; [a protection Place: Itself. gos. Arhitektur.-builds. Un y]. Orenburg, 2008.209 p.: ooze. RSL OD, 61 09-5/590 - Sarkisov Dmitriy YUrevich. Perfection of a method of calculation of reinforced-concrete elements at skew vnetcentrennom static and short-term dynamic compression, a tensioning and a bending down - 2008
Perfection of a method of calculation of reinforced-concrete elements at skew vnetcentrennom static and short-term dynamic compression, a tensioning and a bending down: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Sarkisov Dmitry Jurevich; [a protection Place: Volume. gos. Arhitektur.-builds. Un y]. Tomsk, 2008.191 p.: ooze. RSL OD, 61 09-5/699 - Kretinin Andrey Nikolaevich. Thin-wall girders from gnutyh zinc-coated profiles: Integral belts of box-shaped sectional view and the goffered walls - 2008
Thin-wall girders from gnutyh zinc-coated profiles: integral belts of box-shaped sectional view and the goffered walls: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Kretinin Andrey Nikolaevich; [a protection Place: Sib. feder. Un y]. Novosibirsk, 2008.138 p.: ooze. RSL OD, 61 09-5/229 - Siraziev Lenar Firgatevich. Treshchinostojkost and a deformation property of sborno-monolithic bent designs taking into account influence preliminary zagruzhenija a prefabricated element - 2008
Treshchinostojkost and a deformation property of sborno-monolithic bent designs taking into account influence preliminary zagruzhenija a prefabricated element: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Siraziev Lenar Firgatevich; [a protection Place: Penz. gos. Un y architecture and str-va]. Kazan, 2008.207 p.: ooze. RSL OD, 61 09-5/1238 - Bashkatova Mariyа Evgenevna. the Power estimation of power resistance of elements of reinforced concrete constructions at regime nagruzhenijah and temperature impacts - 2008
A power estimation of power resistance of elements of reinforced concrete constructions at regime nagruzhenijah and temperature impacts: the dissertation... A Cand.Tech.Sci.: 05.23.01 / Bashkatova Maria Evgenevna; [a protection Place: Mosk. In communes. hoz-va and str-va]. - Moscow, 2008. - 174 p.: ooze. RSL OD, 61:08-5/506
-
Acoustic devices and systems -
Aerials, OHF devices and their technologies -
Aerodynamics and processes of heat exchange of flying machines -
Automation and management of technological processes and manufactures (on branches) -
Aviation and space-rocket technics -
Bases and the bases, underground constructions -
Biotechnology of foodstuff (on branches) -
Building -
Building designs, buildings and constructions -
Building materials and products -
Building mechanics -
Cars, motor industry -
Chemical technology of fuel and high-energy substances -
Chemistry technology -
Computer science, computer facilities and management -
Computers and systems -
Control and test of flying machines and their systems -
Designing and a design of courts -
Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels -
Designing, a design and manufacture of flying machines -
Devices and a quality monitoring of an environment, substances, materials and products -
Devices and measurement methods by kinds of measurements -
Devices and methods for measurement of an ionising radiation and x-ray devices -
Devices and methods of transformation of images and a sound -
Devices, systems and products of medical appointment -
Document-knowledge, архив-knowledge -
Documentary information -
Durability and thermal modes of flying machines -
Dynamics, ballistics, traffic control of flying machines -
Electrical engineer -
Electromecanics and electric devices -
Electronics -
Electrotechnical complexes and systems -
Electrotechnical materials and products -
Electrotechnologies and an electric equipment in agriculture -
Electrotechnology -
Elements and devices of computer facilities and control systems -
Energy devices on the basis of renewed kinds of energy -
Engineering geometry and computer drawing -
Engineering geometry and computer drawing -
Engineering technology -
Fire and industrial safety (on branches) -
Foundry manufacture -
Friction and deterioration in machines -
Goodsknowing foodstuff and technology of products of public catering -
Goodsknowing the industrial goods and light industry raw materials -
Heat supply, ventilation, an air conditioning, gas supply and illumination -
Hromatogrophy and Hromatogrophyses devices -
Hydraulic engineering building -
Hydraulic machines and Hydropneumaticunits -
Hydraulics and an engineering hydrology -
Industrial fishery -
Industrial power system -
Information systems and processes, legal aspects of computer science -
Information-measuring and operating systems (on branches) -
Instrument making, metrology both information-measuring devices and systems -
Knowing machines, systems of drives and a detail of machines -
Labour safety (on branches) -
Land complexes, the starting equipment, operation of flying machines -
Library science and bibliology -
Light engineering -
Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support -
Machines, units and processes (on branches) -
Management in social and economic systems -
Management of processes of transportations -
Manufacture Organization (on branches) -
Materials Science -
Materials technology (on branches) -
Materials technology of manufactures textile and light industry -
Mathematical and software of computers, complexes and computer networks -
Mathematical modelling, numerical methods and complexes of programs -
Mechanical engineering and knowing machines -
Membranes and membraneses technology -
Metallurgical science and thermal processing of metals -
Metallurgy -
Metallurgy of black, colour and rare metals -
Metallurgy of technogenic and secondary resources -
Methods and systems of protection of the information, информационня safety -
Metrology and metrological maintenance -
Motor transport Operation -
Mountain machines -
Navigation and an air traffic control -
Navigation Devices -
Nuclear and radiating safety -
Nuclear power installations, including designing, operation and a conclusion from operation -
Nuclear reactor building, machines, units and technology of materials of the nuclear industry -
Operation of air transport -
Optical both optiko-electronic devices and complexes -
Physical fields of the ship, ocean, atmosphere and their interaction -
Powder metallurgy and composite materials -
Power -
Power electronics -
Power plants and power systems -
Power systems and complexes -
Power, metallurgical and chemical mechanical engineering -
Processes and devices of chemical technologies -
Processes and devices of food manufactures -
Processes and machines of agroengineering systems -
Processing of constructional materials in mechanical engineering -
Processing of metals by pressure -
Quality monitoring and diagnostics in mechanical engineering -
Quantum electronics -
Radar-location and radio navigation -
Radio engineering and communication -
Radio engineering, including systems and TV devices -
Radio measuring devices -
Road, building and hoisting-and-transport machines -
Robots, mechatroniks and roboticses systems -
Rolling stock of railways, draught of trains and electrician -
Safety in extreme situations (on branches) -
Safety of activity of the person -
Sailing charter Operation, navigation -
Ship power installations and their elements (main and auxiliary) -
Shipbuilding -
Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects -
Standardization and product quality control -
System analysis, management and information processing (on branches) -
Systems of automation of designing (on branches) -
Systems, networks and devices of telecommunications -
Technical aesthetics and design -
Technical science -
Technics of high pressure -
Technologies and machines of processing by pressure -
Technologies and machines Weldining manufactures -
Technologies and maintenance service means in agriculture -
Technologies and means of mechanisation of agriculture -
Technology and building organisation -
Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics -
Technology and a preprocessing of textile materials and raw materials -
Technology and machines of timber cuttings and a forestry -
Technology and processing of polymers and composites -
Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry -
Technology and the equipment of mechanical and physicotechnical processing -
Technology of a skin and fur -
Technology of electrochemical processes and protection against corrosion -
Technology of fats, essence and perfumery-cosmetic products -
Technology of food products -
Technology of garments -
Technology of inorganic substances -
Technology of instrument making -
Technology of materials and products textile and light industry -
Technology of meat, dairy and fish products and refrigerating manufactures -
Technology of mechanical engineering -
Technology of organic substances -
Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing -
Technology of rare, absent-minded and radioactive elements -
Technology of shipbuilding, ship repair and organisation of ship-building manufacture -
Technology of shoe and kozhevenno-notions products -
Technology of silicate and refractory nonmetallic materials -
Technology of sugar and sugary products -
Technology of tea, tobacco and biologically active substances and subtropical cultures -
Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree -
Telecommunication systems and computer networks -
Theoretical bases of computer science -
Theoretical the electrical engineer -
Theory of mechanisms and machines -
Theory of the ship and building mechanics -
Thermal engines -
Thermal power plants, their power systems and units -
Thermal, electrorocket engines and energydevice flying machines -
Track, research and designing of railways -
Transport -
Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport -
Transport, mountain and building mechanical engineering -
Turbomachines and combined turbounits -
Vacuum and plasma electronics -
Vacuum, compressor technics and pneumatic systems -
Water supply, water drain, building systems of protection of water resources -
Waterways of the message and hydrography -
Wheel and tracklaying vehicles -
Wood-knowledge, technology and the equipment tree-processings -
-
Agricultural sciences -
Architecture and construction -
Art criticism -
Biological sciences -
Chemical sciences -
Cultural science -
Economic sciences -
Engineering science -
Geographical sciences -
Geologo-mineralogical sciences -
Historical sciences -
Jurisprudence -
Management, marketing -
Medical sciences -
Military science -
Pedagogical sciences -
Pharmaceutical sciences -
Philological sciences -
Philosophical sciences -
Physics and mathematics -
Political sciences -
Psychological sciences -
Sciences about the Earth -
Sociological sciences -
Veterinary sciences -