<<
>>

Lukashkin, Aleksandr Nikolaevich. Perfecting of lines of manufacture, The equipment and processes of deriving of the plated flat preforms of the big widths on the basis of aluminium for the purpose of working out of a new class of materials. 2006

Nikolaevich Sovershenstvovanie of lines of manufacture, the equipment and processes of deriving of the plated flat preforms of the big widths on the basis of aluminium for the purpose of working out of a new class of materials: the thesis... A Cand.Tech.Sci.: 05.02.13 Moscow, 2006

<< | >>

Other dissertations on discipline Machines, units and processes (on branches):

  1. Koldin Vladimir Aleksandrovich. The Engineering analysis and optimum projection of horizontal tanks - 2009
    The engineering analysis and optimum projection of horizontal tanks: the thesis... A Cand.Tech.Sci.: 05.02.13 / Koldin Vladimir Aleksandrovich; [a guard Place: Mosk. gos. Un y engineer. Ecology]. Moscow, 2009.251 p.: silt. RSL OD, 61 09-5/1201
  2. Annenko Dmitriy Mihaylovich. Research of processes of shaping of grain structure of cement in focus globe mills of a close-loop - 2009
    Research of processes of shaping of grain structure of cement in focus globe mills of a close-loop: the thesis... A Cand.Tech.Sci.: 05.02.13 / Annenko Dmitry Mihajlovich; [a guard Place: Belgorod. gos. tehnol. Un y of V.G.Shuhova]. Belgorod, 2009.193 p.: Silt. RSL OD, 61 09-5/1122
  3. Uvarov Aleksandr Anatolevich. Research of technological processes in trumpet focus globe mills of a close-loop of refinement - 2009
    Research of technological processes in trumpet focus globe mills of a close-loop of refinement: the thesis... A Cand.Tech.Sci.: 05.02.13 / Uvarov Alexander Anatolevich; [a guard Place: Belgorod. gos. tehnol. Un y of V.G.Shuhova]. Belgorod, 2009.186 p.: silt. RSL OD, 61 09-5/1094
  4. Ashur Raed Saleh. the Analysis of dynamics and perfecting it is receiving-namotochnogo car NV mechanism 1000-KZH9 - 2008
    The analysis of dynamics and perfecting it is receiving-namotochnogo car NV mechanism 1000-KZH9: the thesis... A Cand.Tech.Sci.: 05.02.13 / Ashur Raed Saleh; [a guard Place: S.-Peterb. gos. Un y techniques and design]. - St.-Petersburg, 2008. - 140 p.: silt. RSL OD, 61:08-5/917
  5. Androsov Vladislav Stanislavovich. the Analysis and perfecting of constructions pressovyh steam for cold kongrevnogo stampings - 2008
    The analysis and perfecting of constructions pressovyh steam for cold kongrevnogo stampings: the thesis... A Cand.Tech.Sci.: 05.02.13 / Androsov Vladislav Stanislavovich; [a guard Place: S.-Peterb. gos. Un y techniques and design]. St.-Petersburg, 2008.125 p.: silt. RSL OD, 61 09-5/1300
  6. Bulgakov Evgeniy Borisovich. the Vertical vibrational mill - 2008
    A vertical vibrational mill: the thesis... A Cand.Tech.Sci.: 05.02.13 / Bulgakov Evgenie Borisovich; [a guard Place: Belgorod. gos. tehnol. Un y of V.G.Shuhova]. Belgorod, 2008.189 p.: silt. RSL OD, 61 09-5/162
  7. Fik Andrey Stepanovich. Diagnostics of wave processes of a current of the gas, calling low-frequency oscillations in pipeline webs of compressor stations: On an example of compressor station "Coastal" of pipeline "Russia-Turkey" - 2008
    Diagnostics of wave processes of a current of the gas, calling low-frequency oscillations in pipeline webs of compressor stations: on an example of compressor station "Coastal" of pipeline "Russia-Turkey": the thesis... A Cand.Tech.Sci.: 05.02.13 / Fick Andrey Stepanovich; [a guard Place: Kuban. gos. tehnol. Un y]. - Krasnodar, 2008. - 168 p.: silt. RSL OD, 61:08-5/81
  8. Sitov Ilyа Sergeevich. Dynamics of interaction of a bar-shaped end-effector betonootdelochnoj cars with treated - 2008
    Dynamics of interaction of a bar-shaped end-effector betonootdelochnoj cars with the treated environment: the thesis... A Cand.Tech.Sci.: 05.02.13 / Sitov Ilja Sergeevich; [a guard Place: the Brother. gos. tehn. Un y]. Bratsk, 2008.197 p.: silt. RSL OD, 61 09-5/595
  9. Hrunov Vladimir Andreevich. Research massoobmennyh processes at liquid corrosion of the first aspect of cement concrete - 2008
    Research massoobmennyh processes at liquid corrosion of the first aspect of cement concrete: the thesis... A Cand.Tech.Sci.: 05.02.13 / Hrunov Vladimir Andreevich; [a guard Place: Ivan. gos. Arhitektur.-builds. Un y]. Ivanovo, 2008.137 p.: silt. RSL OD, 61 09-5/366
  10. Kimori Yona Dzhinai. Research of the basic mechanisms of the sewing-machine on the basis of exactitude synthesis - 2008
    Research of the basic mechanisms of the sewing-machine on the basis of exactitude synthesis: the thesis... A Cand.Tech.Sci.: 05.02.13 / Kimori Jona Dzhinai; [a guard Place: Mosk. gos. Un y design and techniques]. - Moscow, 2008. - 145 p.: silt. RSL OD, 61:08-5/198
  11. CHertov Viktor Gennadevich. Cars, aggregates, Processes of mobile pneumotransport installations - 2008
    Cars, aggregates, processes of mobile pneumotransport installations: the thesis... A Cand.Tech.Sci.: 05.02.13 / Devil's Victor Gennadevich; [a guard Place: Belgorod. gos. tehnol. Un y of V.G.Shuhova]. Belgorod, 2008.242 p.: silt. RSL OD, 61 09-5/948
  12. Salahov Tagir Ramilevich. Methodical and experimental security of diagnosing of a condition porodorazrushajushchego the instrument in the course of drilling - 2008
    Methodical and experimental security of diagnosing of a condition porodorazrushajushchego the instrument in the course of drilling: the thesis... A Cand.Tech.Sci.: 05.02.13 / Salahov Tagir Ramilevich; [A guard place: Ufim. gos. Oil tehn. Un y]. Ufa, 2008.129 p.: silt. RSL OD, 61 09-5/997
  13. Laptev Anatoliy Borisovich. Methods and aggregates for magnitogidrodinamicheskoj handlings of water oil - 2008
    Methods and aggregates for magnitogidrodinamicheskoj handlings of water oil environments: the thesis... Dr.Sci.Tech.: 05.02.13 / Laptev Anatoly Borisovich; [a guard Place: GOUVPO "the Ufa state oil technical university"]. - Ufa, 2008. - 242 p.: 61 silt.
  14. Solonetc Valeriy Igorevich. Methods of research of strains in printing contact and lentoprovodjashchej to system of rolled offset cars - 2008
    Methods of research of strains in printing contact and lentoprovodjashchej to system of rolled offset cars: the thesis... A Cand.Tech.Sci.: 05.02.13 / Solonets Valery Igorevich; [a guard Place: Mosk. gos. Un y printings]. Moscow, 2008.190 p.: silt. RSL OD, 61 09-5/184
  15. Plotnikov Dmitriy Anatolevich. the Justification and working out of an unitary construction for manufacture pellet with power supply from processed raw materials - 2008
    A justification and working out of an unitary construction for manufacture pellet with power supply from processed raw materials: the thesis... A Cand.Tech.Sci.: 05.02.13 / Carpenters Dmitry Anatolevich; [a guard Place: Izhev. gos. tehn. Un y]. Izhevsk, 2008.131 p.: silt. RSL OD, 61 08-5/1400
  16. Filatova Natalyа Ivanovna. the Justification of design data of a drive of exhausting gears modular samokrutochnoj the spinning car - 2008
    A justification of design data of a drive of exhausting gears modular samokrutochnoj the spinning car: the thesis... A Cand.Tech.Sci.: 05.02.13 / Filatova Natalia Ivanovna; [a guard Place: the Fire. gos. tehnol. Un y]. - Kostroma, 2008. - 147 p.: silt. RSL OD, 61:08-5/203
  17. Baybara Svetlana Nikolaevna. the Justification of parametres odnozahodnogo vertical shnekovogo the pipeline with dvuhlopastnoj loading - 2008
    A justification of parametres odnozahodnogo vertical shnekovogo the pipeline with dvuhlopastnoj loading: the thesis... A Cand.Tech.Sci.: 05.02.13 / Bajbara Svetlana Nikolaevna; [a guard Place: Juzh.-grew. gos. Un y economy and service]. Shafts, 2008.142 p.: silt. RSL OD, 61 09-5/667
  18. Litunov Sergey Nikolaevich. the theory and calculation Fundamentals trafaretnyh printing machines with rakelem valkovogo type - 2008
    The theory and calculation fundamentals trafaretnyh printing machines with rakelem valkovogo type: the thesis... Dr.Sci.Tech.: 05.02.13 / Litunov Sergey Nikolaevich; [a guard Place: the Moscow state university of a printing]. - Moscow, 2008. - 229 p.: 95 silt.
  19. Babichev Dmitriy Andreevich. the Estimation of the is intense-deformed condition of constructive elements of buildings of variable volume for Storages of oil and mineral oil - 2008
    An estimation of the is intense-deformed condition of constructive elements of buildings of variable volume for storage of oil and mineral oil: the thesis... A Cand.Tech.Sci.: 05.02.13 / Babichev Dmitry Andreevich; [a guard Place: Tjumen. gos. Petrogas. Un y]. Tyumen, 2008.145 p.: silt. RSL OD, 61 08-5/706
  20. Budnikova Olga Aleksandrovna. Heightening of optical protective properties of multilayer packing materials by polygraphy means - 2008
    Heightening of optical protective properties of multilayer packing materials by polygraphy means: the thesis... A Cand.Tech.Sci.: 05.02.13 / Budnikova Olga Aleksandrovna; [a guard Place: Mosk. gos. Un y printings]. Moscow, 2008.170 p.: silt. RSL OD, 61 09-5/149
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -