Ivochkin Mihail YUrevich. Working out of methods of the analysis and synthesis of clutch couplings and perfecting on their base of h-pole serrated spindles of rolling mills. 2004
Working out of methods of the analysis and synthesis of clutch couplings and perfecting on their base of h-pole serrated spindles of rolling mills: Dis.... A Cand.Tech.Sci.: 05.02.18: Moscow, 2004 160 p. RSL OD, 61:05-5/1048
Other dissertations on discipline Theory of mechanisms and machines:
- Nikulin Dmitriy Konstantinovich. Active clearing of oscillations of locators, Placed on fastened balloons with use of mechanisms of parallel kinematics - 2008
Active clearing of oscillations of the locators placed on fastened balloons with use of mechanisms of parallel kinematics: the thesis... A Cand.Tech.Sci.: 05.02.18 / Nikulin Dmitry Konstantinovich; [a guard Place: In mashinovedenija of A.A.Blagonravova of the Russian Academy of Sciences]. Moscow, 2008.115 p.: silt. RSL OD, 61 08-5/1458 - Nahatakyаn Filaret Gurgenovich. Influence of a distortion on loading distribution in a toothing and between satellites in an epicyclic gear - 2008
Influence of a distortion on loading distribution in a toothing and between satellites in an epicyclic gear: the thesis... A Cand.Tech.Sci.: 05.02.18, 01.02.06 / Nahatakjan Philaret Gurgenovich; [a guard Place: In mashinovedenija of A.A.Blagonravova of the Russian Academy of Sciences]. Moscow, 2008.156 p.: silt. RSL OD, 61 09-5/1199
- Kangun Roman Vitalevich. Dynamic simulation of self-oscillatory cycles of mechanisms on an example of cars Stirlinga - 2008
Dynamic simulation of self-oscillatory cycles of mechanisms on an example of cars Stirlinga: the thesis... A Cand.Tech.Sci.: 05.02.18, 05.04.02 / Kangun Novel Vitalevich; [a guard Place: In mashinovedenija of A.A.Blagonravova of the Russian Academy of Sciences]. Moscow, 2008.137 p.: silt. RSL OD, 61 08-5/1349 - Starikov Stepan Pavlovich. the Justification kinematic and kinetostaticheskoj resolvability shestizvennyh sharnirnyh flat groups of Assur - 2008
Justification kinematic and kinetostaticheskoj resolvability shestizvennyh sharnirnyh flat groups of Assur: the thesis... A Cand.Tech.Sci.: 05.02.18 / Old men Stepan Pavlovich; [a guard Place: Novosib. gos. tehn. Un y]. Novosibirsk, 2008.155 p.: silt. RSL OD, 61 09-5/642
- Kurasov Dmitriy Alekseevich. Working out and research h-pole serrated ehkstcentrikovyh bearings and mechanisms, Constructed on their base - 2008
Working out and research h-pole serrated ehkstcentrikovyh bearings and the mechanisms constructed on their base: the thesis... A Cand.Tech.Sci.: 05.02.18 / Kurasov Dmitry Alekseevich; [a guard Place: Izhev. gos. tehn. Un y]. barrow, 2008.140 p.: silt. RSL OD, 61 09-5/682 - CHepikova Tatyаna Petrovna. Working out and a justification of rational circuits of differential besstupenchato-regulated transmissions with internal separation of a stream of power - 2008
Working out and justification of rational circuits of differential besstupenchato-regulated transmissions with internal separation of a stream of power: the thesis... A Cand.Tech.Sci.: 05.02.18 / Chepikova Tatyana Petrovna; [a guard Place: Izhev. gos. tehn. Un y]. - Izhevsk, 2008. - 162 p.: silt. RSL OD, 61:08-5/822 - Parshin Aleksandr Nikolaevich. Working out of methods of the analysis, Synthesis of linkage and manufacture of arch cylindrical cogwheels - 2008
Working out of methods of the analysis, synthesis of linkage and manufacture of arch cylindrical cogwheels: the thesis... A Cand.Tech.Sci.: 05.02.18 / Parshin Alexander Nikolaevich; [a guard Place: IMASh the Russian Academy of Sciences]. Moscow, 2008.159 p.: silt. RSL OD, 61 09-5/302 - Haydakin Maksim Sergeevich. Lowering vibrational nagruzhennosti two-cylinder explosion engines by application of additional balancing shafts - 2008
Lowering vibrational nagruzhennosti two-cylinder explosion engines by application of additional balancing shafts: the thesis... A Cand.Tech.Sci.: 05.02.18 / Hajdakin Maxim Sergeevich; [a guard Place: In mashinovedenija of A.A.Blagonravova of the Russian Academy of Sciences]. - Moscow, 2008. - 162 p.: silt. - Mullabaev Adunis Abdullinovich. Structurally-kinematic synthesis of multiply connected h-pole serrated mechanisms on the basis of methods of theory of combinations - 2008
Structurally-kinematic synthesis of multiply connected h-pole serrated mechanisms on the basis of methods of theory of combinations: the thesis... Dr.Sci.Tech.: 05.02.18 / Mullabaev Adunis Abdullinovich; [a guard Place: GOUVPO "the Izhevsk state technical university"]. - Izhevsk, 2008. - 387 p.: 20 silt. - Mugin Oleg Olegovich. Theoretical both an experimental research and working out of hydrolegs of power aggregates of cars - 2008
Theoretical both an experimental research and working out of hydrolegs of power aggregates of cars: the thesis... A Cand.Tech.Sci.: 05.02.18 / Mugin Oleg Olegovich; [a guard Place: In mashinovedenija of A.A.Blagonravova of the Russian Academy of Sciences]. Moscow, 2008.166 p.: silt. RSL OD, 61 09-5/173 - Ershov YUriy Vasilevich. the Analysis and synthesis of epicyclic transmissions K-H-V with intermediate bodies of a rolling - 2007
The analysis and synthesis of epicyclic transmissions K-H-V with intermediate bodies of a rolling: the thesis... A Cand.Tech.Sci.: 05.02.18 Novocherkassk, 2007 242 p. RSL OD, 61:07-5/2379 - Petrishev Maksim Sergeevich. Dynamics of pendular systems in the conditions of mechanical and magnetic vibrations - 2007
Dynamics of pendular systems in the conditions of mechanical and magnetic vibrations: dis.... A Cand.Tech.Sci.: 05.02.18 SPb., 2007 139 p. RSL OD, 61:07-5/2148 - CHan Ngok CHau. Research of influence of vibrations on dynamics krivoshipno-polzunnogo the mechanism and a nonlinear pendulum - 2007
Research of influence of vibrations on dynamics krivoshipno-polzunnogo the mechanism and a nonlinear pendulum: dis.... kand. tehn. Sciences: 05.02.18 SPb., 2007 191 p. RSL OD, 61:07-5/1988 - Romantcov Vladimir Nikolaevich. Kinematic synthesis of multiply connected transmissions - 2007
Kinematic synthesis of multiply connected transmissions: the thesis... A Cand.Tech.Sci.: 05.02.18 Orenburg, 2007 151 p. RSL OD, 61:07-5/3330 - Bolshakov Nikita Sergeevich. the Justification of paths of expansion of functionality krivoshipno-polzunnyh mechanisms - 2007
A justification of paths of expansion of functionality krivoshipno-polzunnyh mechanisms: the thesis... A Cand.Tech.Sci.: 05.02.18 Novokuznetsk, 2007 164 p. RSL OD, 61:07-5/2998 - Andrienko Pavel Aleksandrovich. Working out of methods of the dynamic analysis of heavy cars with a hydraulic drive - 2007
Working out of methods of the dynamic analysis of heavy cars with a hydraulic drive: the thesis... A Cand.Tech.Sci.: 05.02.18 St.-Petersburg, 2007 117 p., Bibliogr.: p. 114-117 RSL OD, 61:07-5/4444 - Kozlikin Denis Petrovich. Devices of compensation of slugged forces in vibrorotatcionnyh stands - 2007
Devices of compensation of slugged forces in vibrorotatcionnyh stands: the thesis... A Cand.Tech.Sci.: 05.02.18 St.-Petersburg, 2007 133 p., Bibliogr.: p. 130-133 RSL OD, 61:07-5/4354 - Lukin Maksim Vladimirovich. Synthesis of laws of movement kulachkovyh mechanisms on the basis of Fourier series wave constituents - 2007
Synthesis of laws of movement kulachkovyh mechanisms on the basis of Fourier series wave constituents: the thesis... A Cand.Tech.Sci.: 05.02.18 / Lukin Maxim Vladimirovich; [a guard Place: Novosib. gos. tehn. Un y]. Novosibirsk, 2007.161 p.: silt. RSL OD, 61 07-5/5155 - Hohlova Olga Aleksandrovna. Research of dynamics of the mechanism of variable structure with the combined rod - 2006
Research of dynamics of the mechanism of variable structure with the combined rod: Dis.... A Cand.Tech.Sci.: 05.02.18 Astrakhan, 2006 155 p. RSL OD, 61:06-5/3319 - Kazantcev Aleksandr Sergeevich. Research contact and izgibnoj durabilities of the internal approximate linkage of nonconventional epicyclic transmission - 2006
Research contact and izgibnoj durabilities of the internal approximate linkage of nonconventional epicyclic transmission: Dis.... A Cand.Tech.Sci.: 05.02.02, 05.02.18 Izhevsk, 2006 163 p. RSL OD, 61:06-5/2625
-
Acoustic devices and systems -
Aerials, OHF devices and their technologies -
Aerodynamics and processes of heat exchange of flying machines -
Automation and management of technological processes and manufactures (on branches) -
Aviation and space-rocket technics -
Bases and the bases, underground constructions -
Biotechnology of foodstuff (on branches) -
Building -
Building designs, buildings and constructions -
Building materials and products -
Building mechanics -
Cars, motor industry -
Chemical technology of fuel and high-energy substances -
Chemistry technology -
Computer science, computer facilities and management -
Computers and systems -
Control and test of flying machines and their systems -
Designing and a design of courts -
Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels -
Designing, a design and manufacture of flying machines -
Devices and a quality monitoring of an environment, substances, materials and products -
Devices and measurement methods by kinds of measurements -
Devices and methods for measurement of an ionising radiation and x-ray devices -
Devices and methods of transformation of images and a sound -
Devices, systems and products of medical appointment -
Document-knowledge, архив-knowledge -
Documentary information -
Durability and thermal modes of flying machines -
Dynamics, ballistics, traffic control of flying machines -
Electrical engineer -
Electromecanics and electric devices -
Electronics -
Electrotechnical complexes and systems -
Electrotechnical materials and products -
Electrotechnologies and an electric equipment in agriculture -
Electrotechnology -
Elements and devices of computer facilities and control systems -
Energy devices on the basis of renewed kinds of energy -
Engineering geometry and computer drawing -
Engineering geometry and computer drawing -
Engineering technology -
Fire and industrial safety (on branches) -
Foundry manufacture -
Friction and deterioration in machines -
Goodsknowing foodstuff and technology of products of public catering -
Goodsknowing the industrial goods and light industry raw materials -
Heat supply, ventilation, an air conditioning, gas supply and illumination -
Hromatogrophy and Hromatogrophyses devices -
Hydraulic engineering building -
Hydraulic machines and Hydropneumaticunits -
Hydraulics and an engineering hydrology -
Industrial fishery -
Industrial power system -
Information systems and processes, legal aspects of computer science -
Information-measuring and operating systems (on branches) -
Instrument making, metrology both information-measuring devices and systems -
Knowing machines, systems of drives and a detail of machines -
Labour safety (on branches) -
Land complexes, the starting equipment, operation of flying machines -
Library science and bibliology -
Light engineering -
Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support -
Machines, units and processes (on branches) -
Management in social and economic systems -
Management of processes of transportations -
Manufacture Organization (on branches) -
Materials Science -
Materials technology (on branches) -
Materials technology of manufactures textile and light industry -
Mathematical and software of computers, complexes and computer networks -
Mathematical modelling, numerical methods and complexes of programs -
Mechanical engineering and knowing machines -
Membranes and membraneses technology -
Metallurgical science and thermal processing of metals -
Metallurgy -
Metallurgy of black, colour and rare metals -
Metallurgy of technogenic and secondary resources -
Methods and systems of protection of the information, информационня safety -
Metrology and metrological maintenance -
Motor transport Operation -
Mountain machines -
Navigation and an air traffic control -
Navigation Devices -
Nuclear and radiating safety -
Nuclear power installations, including designing, operation and a conclusion from operation -
Nuclear reactor building, machines, units and technology of materials of the nuclear industry -
Operation of air transport -
Optical both optiko-electronic devices and complexes -
Physical fields of the ship, ocean, atmosphere and their interaction -
Powder metallurgy and composite materials -
Power -
Power electronics -
Power plants and power systems -
Power systems and complexes -
Power, metallurgical and chemical mechanical engineering -
Processes and devices of chemical technologies -
Processes and devices of food manufactures -
Processes and machines of agroengineering systems -
Processing of constructional materials in mechanical engineering -
Processing of metals by pressure -
Quality monitoring and diagnostics in mechanical engineering -
Quantum electronics -
Radar-location and radio navigation -
Radio engineering and communication -
Radio engineering, including systems and TV devices -
Radio measuring devices -
Road, building and hoisting-and-transport machines -
Robots, mechatroniks and roboticses systems -
Rolling stock of railways, draught of trains and electrician -
Safety in extreme situations (on branches) -
Safety of activity of the person -
Sailing charter Operation, navigation -
Ship power installations and their elements (main and auxiliary) -
Shipbuilding -
Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects -
Standardization and product quality control -
System analysis, management and information processing (on branches) -
Systems of automation of designing (on branches) -
Systems, networks and devices of telecommunications -
Technical aesthetics and design -
Technical science -
Technics of high pressure -
Technologies and machines of processing by pressure -
Technologies and machines Weldining manufactures -
Technologies and maintenance service means in agriculture -
Technologies and means of mechanisation of agriculture -
Technology and building organisation -
Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics -
Technology and a preprocessing of textile materials and raw materials -
Technology and machines of timber cuttings and a forestry -
Technology and processing of polymers and composites -
Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry -
Technology and the equipment of mechanical and physicotechnical processing -
Technology of a skin and fur -
Technology of electrochemical processes and protection against corrosion -
Technology of fats, essence and perfumery-cosmetic products -
Technology of food products -
Technology of garments -
Technology of inorganic substances -
Technology of instrument making -
Technology of materials and products textile and light industry -
Technology of meat, dairy and fish products and refrigerating manufactures -
Technology of mechanical engineering -
Technology of organic substances -
Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing -
Technology of rare, absent-minded and radioactive elements -
Technology of shipbuilding, ship repair and organisation of ship-building manufacture -
Technology of shoe and kozhevenno-notions products -
Technology of silicate and refractory nonmetallic materials -
Technology of sugar and sugary products -
Technology of tea, tobacco and biologically active substances and subtropical cultures -
Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree -
Telecommunication systems and computer networks -
Theoretical bases of computer science -
Theoretical the electrical engineer -
Theory of mechanisms and machines -
Theory of the ship and building mechanics -
Thermal engines -
Thermal power plants, their power systems and units -
Thermal, electrorocket engines and energydevice flying machines -
Track, research and designing of railways -
Transport -
Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport -
Transport, mountain and building mechanical engineering -
Turbomachines and combined turbounits -
Vacuum and plasma electronics -
Vacuum, compressor technics and pneumatic systems -
Water supply, water drain, building systems of protection of water resources -
Waterways of the message and hydrography -
Wheel and tracklaying vehicles -
Wood-knowledge, technology and the equipment tree-processings -
-
Agricultural sciences -
Architecture and construction -
Art criticism -
Biological sciences -
Chemical sciences -
Cultural science -
Economic sciences -
Engineering science -
Geographical sciences -
Geologo-mineralogical sciences -
Historical sciences -
Jurisprudence -
Management, marketing -
Medical sciences -
Military science -
Pedagogical sciences -
Pharmaceutical sciences -
Philological sciences -
Philosophical sciences -
Physics and mathematics -
Political sciences -
Psychological sciences -
Sciences about the Earth -
Sociological sciences -
Veterinary sciences -