<<

Volkov Mihail YUrevich. Perfection of system of ventilation of a crankcase of the two-cylinder injection engine. 2008

Perfection of system of ventilation of a crankcase of the two-cylinder injection engine: the dissertation... A Cand.Tech.Sci.: 05.04.02 / Wolves Michael Jurevich; [a protection Place: Vladimir. gos. Un y]. - Vladimir, 2008.126 p.: silt. RSL OD, 61 09-5/934

<< | >>

Other dissertations on discipline Thermal engines:

  1. Gavrilov Aleksandr Mihaylovich. cooling Influence nadduvochnogo and additional air on technical and economic indexes of the diesel drive - 2008
    Cooling influence nadduvochnogo and additional air on technical and economic indexes of the diesel drive: the thesis... A Cand.Tech.Sci.: 05.04.02 / Gavrilov Alexander Mihajlovich; [a guard Place: Kazan. gos. tehn. Un y of A.N.Tupolev]. - Kazan, 2008. - 177 p.: silt. RSL OD, 61:08-5/101
  2. Kopein Aleksey Viktorovich. the Choice of a high-speed condition of primary diesel drives of hybrid power installations for the purpose of improvement of their ecological performances - 2008
    Choice of a high-speed condition of primary diesel drives of hybrid power installations for the purpose of improvement of their ecological performances: the thesis... A Cand.Tech.Sci.: 05.04.02 / Kopein Alexey Viktorovich; [a guard Place: Alt. gos. tehn. Un y of I.I.polzunova]. Chelyabinsk, 2008.152 p.: silt. RSL OD, 61 09-5/531
  3. Latipov Kamil Musalimovich. Research of dynamic characteristics gazodizelnogo the drive - 2008
    Research of dynamic characteristics gazodizelnogo the drive: the thesis... A Cand.Tech.Sci.: 05.04.02 / Latypov Kamil Musalimovich; [a guard Place: Kazan. gos. tehn. Un y of A.N.Tupolev]. Kazan, 2008.136 p.: Silt. RSL OD, 61 09-5/407
  4. Gutierres Oheda Markos Ksaver. the Method of lowering of thermal losses and thermal stress of diesel engines with use of semitransmitting ceramic coverages - 2008
    A method of lowering of thermal losses and thermal stress of diesel engines with use of semitransmitting ceramic coverages: the thesis... A Cand.Tech.Sci.: 05.04.02 / Gutierres Oheda Markos Ksaver; [a guard Place: Mosk. gos. tehn. Un y (MAMI)]. - Moscow, 2008. - 114 p.: silt. RSL OD, 61:08-5/142
  5. Korneev Nikolay Vladimirovich. Methods of prediction and lowering of vibration of flexible systems of turbine units - 2008
    Methods of prediction and lowering of vibration of flexible systems of turbine units: the thesis... Dr.Sci.Tech.: 05.04.02 / Korneyev Nikolay Vladimirovich; [a guard Place: Moscow state technical university "MAMI"]. - Moscow, 2008. - 235 p.: 74 silt.
  6. Karpov Maksim Anatolevich. the Estimation of influence of variability of slugged performances of the power aggregate on parametres of a vibratory system the drive-suspension bracket - 2008
    An estimation of influence of variability of slugged performances of the power aggregate on parametres of a vibratory system the drive-suspension bracket: the thesis... A Cand.Tech.Sci.: 05.04.02 / Carps Maxim Anatolevich; [a guard Place: Mosk. gos. avtomobil.-dorozh. In (tehn. Un y)]. Moscow, 2008.113 p.: silt. RSL OD, 61 08-5/1457
  7. Kondrenko Vitaliy Andreevich. Heightening of a technological level of the shaped diesel engines by lowering teplomehanicheskoj intensity of sprays of atomizers: On an example of diesel engines of type ChN 12/12 - 2008
    Heightening of a technological level of the shaped diesel engines by lowering teplomehanicheskoj intensity of sprays of atomizers: on an example of diesel engines of type ChN 12/12: the thesis... A Cand.Tech.Sci.: 05.04.02 / Kondrenko Vitaly Andreevich; [a guard Place: Alt. gos. tehn. Un y of I.I.polzunova]. Barnaul, 2008.178 p.: silt. RSL OD, 61 08-5/764
  8. Medvedev Aleksey Nikolaevich. Heightening of fuel profitability of automobile diesel engines by cutting off of a part of cylinders - 2008
    Heightening of fuel profitability of automobile diesel engines by cutting off of a part of cylinders: the thesis... A Cand.Tech.Sci.: 05.04.02 / Medvedev Alexey Nikolaevich; [a guard Place: Juzh.-Ur. gos. Un y]. Chelyabinsk, 2008.138 p.: silt. RSL OD, 61 08-5/1608
  9. Epifanov Ivan Vyаcheslavovich. Heightening fuel-economic and ecological parametres DVS architecture of process with spontaneous ignition of a homogeneous charge - 2008
    Heightening fuel-economic and ecological parametres DVS architecture of process with spontaneous ignition of a homogeneous charge: the thesis... A Cand.Tech.Sci.: 05.04.02 / Yepifanov Ivan Vjacheslavovich; [a guard Place: Dews. Un y friendship of the people]. Moscow, 2008.141 p. : Silt. RSL OD, 61 08-5/1459
  10. Bistrov Oleg Ivanovich. Heightening of economic and ecological indexes of a diesel engine by realisation combined shestitaktnogo a cycle - 2008
    Heightening of economic and ecological indexes of a diesel engine by realisation combined shestitaktnogo a cycle: the thesis... A Cand.Tech.Sci.: 05.04.02 / Bystrov Oleg Ivanovich; [a guard Place: Juzh.-Ur. gos. Un y]. Chelyabinsk, 2008.174 p.: silt. RSL OD, 61 09-5/728
  11. Kuzmin Andrey Vladimirovich. Indexes and regulations bitoplivnogo the drive while translating it from gasoline on the liquefied hydrocarbonic gas - 2008
    Indexes and regulations bitoplivnogo the drive while translating it from gasoline on the liquefied hydrocarbonic gas: the thesis... A Cand.Tech.Sci.: 05.04.02 / Kuzmin Andrey Vladimirovich; [a guard Place: Volgogr. gos. tehn. Un y]. Volgograd, 2008.116 p.: silt. RSL OD, 61 09-5/698
  12. Olisevich Oleg Vyаcheslavovich. Working out of mathematical models also is settlement-experimental research diesel accumulative fuel systems with electrohydraulic atomizers - 2008
    Working out of mathematical models also it is settlement-experimental research diesel accumulative fuel systems with electrohydraulic atomizers: the thesis... A Cand.Tech.Sci.: 05.04.02 / Olisevich Oleg Vjacheslavovich; [a guard Place: the Center. nauch.-issled. Automobile phones. And the automotor. In "US"]. Moscow, 2008.160 p.: silt. RSL OD, 61 09-5/401
  13. Lazarev Vasiliy Mihaylovich. Working out of a method of calculation and an estimation of a system effectiveness of liquid cooling of a tractor diesel engine - 2008
    Working out of a method of calculation and an estimation of a system effectiveness of liquid cooling of a tractor diesel engine: the thesis... A Cand.Tech.Sci.: 05.04.02 / Lazarev Vasily Mihajlovich; [a guard Place: Vladimir. gos. Un y]. Vladimir, 2008.118 p.: silt. RSL OD, 61 09-5/935
  14. Bangoyаn Emil Gaykovich. Working out of methods and means of noise abatement of exhaustion of injection engines of truck loaders (on an instance of the injection engine of truck loader DV-1792M) - 2008
    Working out of methods and means of noise abatement of exhaustion of injection engines of truck loaders (on an instance of the injection engine of truck loader DV-1792M): the dissertation... A Cand.Tech.Sci.: 05.04.02 / Bangojan Ehmil Gajkovich; [a protection Place: Moscow state technical university "MAMI"]. - Moscow, 2008. - 269 p.: 17 silt.
  15. Grachev Aleksandr YUrevich. System engineering of a food of the injection engine for the car, Main fuel using in the capacity of dimetilovyj an aether - 2008
    System engineering of a food of the injection engine for the car using in the capacity of of main fuel dimetilovyj an aether: the dissertation. . A Cand.Tech.Sci.: 05.04.02 / Grachev Alexander Jurevich; [a protection Place: Mosk. gos. avtomobil.-dorozh. In (tehn. Un y)]. - Moscow, 2008. - 165 p.: silt. RSL OD, 61:08-5/1079
  16. Kuznetcov Maksim Vladimirovich. Perfection of parametres of work 4 taktnogo of injection engine of autotractor type on regimes of small loadings and an idle running - 2008
    Perfection of parametres of work 4 taktnogo the injection engine of autotractor type on regimes of small loadings and an idle running: the dissertation... A Cand.Tech.Sci.: 05.04.02 / Smiths Maxim Vladimirovich; [a protection Place: Dews. Un y friendship of the people]. Moscow, 2008.120 p.: silt. RSL OD, 61 09-5/950
  17. SHashev Aleksandr Valentinovich. Perfection of working process of the injection engine with a volume-film mixing at use in the capacity of fuel rapsovogo oils - 2008
    Perfection of working process of the injection engine with a volume-film mixing at use in the capacity of fuel rapsovogo oils: The dissertation... A Cand.Tech.Sci.: 05.04.02 / Shashev Alexander Valentinovich; [a protection Place: Alt. gos. tehn. Un y of I.I.polzunova]. - Barnaul, 2008. - 135 p.: silt. RSL OD, 61:07-5/5249
  18. Efanov Aleksey Aleksandrovich. Martempering of ecological characteristics of the injection engine by composition regulating smesevogo biofuels - 2008
    Martempering of ecological characteristics of the injection engine by composition regulating smesevogo biofuels: the dissertation... A Cand.Tech.Sci.: 05.04.02 / Efanov Alexey Aleksandrovich; [a protection Place: Mosk. gos. tehn. Un y it. AD Bauman]. - Moscow, 2008. - 127 p.: silt.
  19. Poluhin Evgeniy Evgenevich. Martempering of ekspluatatsionno-technical parametres of the transport injection engine by perfection of system of regulating of an angle of an advancing of injection of fuel - 2008
    Martempering of ekspluatatsionno-technical parametres of the transport injection engine by perfection of system of regulating of an angle of an advancing of injection of fuel: the dissertation... A Cand.Tech.Sci.: 05.04.02 / Poluhin Evgenie Evgenevich; [a protection Place: Mosk. gos. tehn. Un y it. AD Bauman]. - Moscow, 2008. - 152 p.: silt. RSL OD, 61:08-5/1176
  20. Korshunov Denis Andreevich. Martempering of operational parametres of the transport injection engine by use of biofuels on a basis rapsovogo oils - 2008
    Martempering of operational parametres of the transport injection engine by use of biofuels on a basis rapsovogo oils: the dissertation... A Cand.Tech.Sci.: 05.04.02 / Kites Denis Andreevich; [a protection Place: Mosk. gos. tehn. Un y it. AD Bauman]. Moscow, 2008.185 p.: silt. RSL OD, 61 08-5/1042
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -