Tihomirov Anton Fedorovich. Change of properties of the charged polymeric films under the influence of an internal electric field, mechanical loadings and humidity. 0000

Change of properties of the charged polymeric films under the influence of an internal electric field, mechanical loadings and humidity: silt RSL of OD 61:85-5/383

<< |

Other dissertations on discipline Electrotechnical materials and products:

  1. SHikova Tatyna Mihaylovna. Research and improvement of manufacturing techniques of isolation statornyh windings of high-voltage electric cars - 2007
    Research and improvement of manufacturing techniques of isolation statornyh windings of high-voltage electric cars: the dissertation... A Cand.Tech.Sci.: 05.09.02 St.-Petersburg, 2007 221 p., Bibliogr.: p. 202-215 RSL OD, 61:07-5/4696
  2. Egorov Nikita YUrevich. Composite materials dielectric-conductor (high-temperature superconducting material) for electric power industry - 2007
    Composite materials dielectric-conductor (high-temperature superconducting material) for electric power industry: the dissertation... A Cand.Tech.Sci.: 05.09.02 St.-Petersburg, 2007 203 p. RSL OD, 61:07-5/3423
  3. Koktcinskay Elena Mihaylovna. Working out and research of antidischarge Jaoatings of tape type for modern ways of manufacturing of systems of isolation of high-voltage electric cars - 2007
    Working out and research of antidischarge Jaoatings of tape type for modern ways of manufacturing of systems of isolation of high-voltage electric cars: the dissertation... A Cand.Tech.Sci.: 05.09.02 St.-Petersburg, 2007 175 p. RSL OD, 61:07-5/3367
  4. Marin Sergey Sergeevich. Working out of a method of an estimation of durability of isolation of low-voltage electric cars - 2007
    Working out of a method of an estimation of durability of isolation of low-voltage electric cars: dis.... A Cand.Tech.Sci.: 05.09.02 Tomsk, 2007 136 p. RSL OD, 61:07-5/2067
  5. Frizen Aleksey Nikolaevich. Maintenance of reliability indexes neftepogruzhnyh cables at a stage of manufacturing and while in service - 2007
    Maintenance of reliability indexes neftepogruzhnyh cables at a stage of manufacturing and while in service: the dissertation... A Cand.Tech.Sci.: 05.09.02 / Frizen Alexey Nikolaevich; [a protection Place: Volume. politehn. Un y]. Tomsk, 2007.151 p.: silt. RSL OD, 61 07-5/5231
  6. Ovchinnikov Andrey Aleksandrovich. Research of influence of designs and manufacturing techniques on firmness of optical cables for information transfer systems to influence of mechanical loadings - 2006
    Research of influence of designs and manufacturing techniques on firmness of optical cables for information transfer systems to influence of mechanical loadings: dis.... A Cand.Tech.Sci.: 05.11.14, 05.09.02 Moscow, 2006 211 p. RSL OD, 61:06-5/3788
  7. CHayko Vadim YUrevich. Research and working out of optimum technology and the equipment intended for drawing of a sheeting on conductors - 2006
    Research and working out of optimum technology and the equipment intended for drawing of a sheeting on conductors: dis.... kand. tehn. Sciences: 05.09.02 Moscow, 2006 95 p. RSL OD, 61:07-5/465
  8. Dustkam Mehdi. Account of temperature of a pipe of the case, conductors and as much as possible current capacity of loading germovvodov, The cables intended for input in the atomic power station with the steel containment - 2006
    Account of temperature of a pipe of the case, conductors and as much as possible current capacity of loading germovvodov, the cables intended for input in the atomic power station with the steel containment: Dis.... A Cand.Tech.Sci.: 05.09.02 Moscow, 2006 105 p. RSL OD, 61:06-5/2517
  9. Ovchinnikov Andrey Aleksandrovich. Research of influence of designs and manufacturing techniques on firmness of optical cables for information transfer systems to influence of mechanical loadings - 2006
    Research of influence of designs and manufacturing techniques on firmness of optical cables for information transfer systems to influence of mechanical loadings: the dissertation... A Cand.Tech.Sci.: 05.11.14, 05.09.02. - Moscow, 2006.211 p.: silt. RSL OD, 61 06-5/3788
  10. Li TCzen Fen. Sedimentation of films GaAs from abljatcionnoj of plasma, Formed by a pulse powerful ion beam - 2006
    Sedimentation of films GaAs from abljatcionnoj the plasma formed by a pulse powerful ion beam: Dis.... A Cand.Tech.Sci.: 05.09.02, 01.04.04 Tomsk, 2006 130 p. RSL OD, 61:06-5/3282
  11. Maslykov Sergey Aleksandrovich. Computer modelling of influence of distinction in thermal expansion of a wave guide and a solid-state dielectric on observed data E* of dielectrics volnovodnym a method at heats - 2005
    Computer modelling of influence of distinction in thermal expansion of a wave guide and a solid-state dielectric on observed data E* of dielectrics volnovodnym a method at heats: Dis.... A Cand.Tech.Sci.: 05.09.02 SPb., 2005 216 p. RSL OD, 61:05-5/3120
  12. Han Baochzhun. Modelling of properties of cross-linked polyethylene - 2005
    Modelling of properties of cross-linked polyethylene: Dis.... A Cand.Tech.Sci.: 05.09.02 Moscow, 2005 163 p. RSL OD, 61:05-5/2976
  13. Nesterko Viktoriy Aleksandrovna. the Estimation of firmness of designs of optical cables to radial influence of water - 2005
    An estimation of firmness of designs of optical cables to radial influence of water: Dis.... A Cand.Tech.Sci.: 05.09.02 Moscow, 2005 190 p. RSL OD, 61:05-5/3963
  14. Dambis Mariy Karlovna. Working out microwave ceramic vysokodobrotnyh materials with operated properties - 2005
    Working out microwave ceramic vysokodobrotnyh materials with operated properties: Dis.... A Cand.Tech.Sci.: 05.09.02 Moscow, 2005 109 p. RSL OD, 61:05-5/2902
  15. Zvolinskay Anastasiy YUrevna. Working out of physicotechnical bases of a way of the continuous control of impregnating compound for a high-voltage thermosetting insulation - 2005
    Working out of physicotechnical bases of a way of the continuous control of impregnating compound for a high-voltage thermosetting insulation: Dis.... A Cand.Tech.Sci.: 05.09.02 SPb., 2005 173 p. RSL OD, 61:06-5/1739
  16. Maslykova Anna Vycheslavovna. Increase of electrophysical characteristics and stability to thermoageing tcelljulozosoderzhashchego dielectric with the help hitozana - 2005
    Increase of electrophysical characteristics and stability to thermoageing tcelljulozosoderzhashchego dielectric with the help hitozana: the dissertation... A Cand.Tech.Sci.: 05.09.02. - St.-Petersburg, 2005.204 p.: silt. RSL OD, 61 05-5/3189
  17. Emelynov Oleg Anatolevich. Working capacity metalloplenochnyh condensers in the formed electrothermal conditions - 2004
    Working capacity metalloplenochnyh condensers in the formed electrothermal conditions: Dis.... A Cand.Tech.Sci.: 05.09.02: St.-Petersburg, 2004 246 p. RSL OD, 61:04-5/2265
  18. Boev Andrey Mihaylovich. Working out and a reliability assessment of self-bearing covered conductors - 2004
    Working out and reliability assessment of self-bearing covered conductors: Dis.... A Cand.Tech.Sci.: 05.09.02: Moscow, 2004 116 p. RSL OD, 61:04-5/2677
  19. Fursov Petr Vasilevich. Working out of technology of reception of the monolithic polyethylene insulation connecting and terminators of high-voltage energy cables - 2004
    Working out of technology of reception of the monolithic polyethylene insulation connecting and terminators of high-voltage energy cables: Dis.... A Cand.Tech.Sci.: 05.09.02: Moscow, 2004 168 p. RSL OD, 61:04-5/4206
  20. Larin YUriy Timofeevich. Theoretical and exploratory development of methods of designing of optical cables - 2004
    Theoretical and exploratory development of methods of designing of optical cables: Dis.... Dr.Sci.Tech.: 05.09.02: M, 2004 215 p. RSL OD, 71:05-5/424
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, -knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -