Muhin Mihail YUrevich. Technological bases of maintenance of reliability of oil-field pipelines of the Self-Tlorsky deposit. 2001

Technological bases of maintenance of reliability of oil-field pipelines of the Self-Tlorsky deposit: the dissertation... A Cand.Tech.Sci. in shape nauch. dokl.: 05.04.09. - Chelyabinsk, 2001.50 p.: silt. RSL OD, 61 02-5/1679-2

| >>

Other dissertations on discipline Power, metallurgical and chemical mechanical engineering:

  1. Paliy Roman Viktorovich. Technological methods of raise of operational parametres of trade pipelines and skvazhinnogo the oil equipment of the Self-Tlorsky deposit - 2001
    Technological methods of raise of operational parametres of trade pipelines and skvazhinnogo the oil equipment of the Self-Tlorsky deposit: the dissertation... A Cand.Tech.Sci. in shape nauch. dokl.: 05.04.09. - Chelyabinsk, 2001.47 p.: silt. RSL OD, 61 02-5/1677-6
  2. Solodovnikov Dmitriy Sergeevich. Vejvlety and the determined chaos at the analysis vibrosignalov centrifugally-compressor aggregates - 2000
    Vejvlety and the determined chaos at the analysis vibrosignalov centrifugally-compressor aggregates: Dis.... A Cand.Tech.Sci.: 05.04.09 Ufa, 2000 147 p. RSL OD, 61:00-5/2991-0
  3. Musin Marat Minniahmetovich. Working out germetizatorov a mouth and flowmeters for heightening of efficiency of research and Maintenance of slits - 2000
    Working out germetizatorov a mouth and flowmeters for heightening of efficiency of research and maintenance of slits: Dis.... A Cand.Tech.Sci.: 05.04.07 Ufa, 2000 132 p. RSL OD, 61:00-5/1565-0
  4. Abdrahmanov Nail Haditovich. Working out of the hydrodynamic cavitational device for merging of systems a fluid-liquid - 2000
    Working out of the hydrodynamic cavitational device for merging of systems a fluid-liquid: Dis.... A Cand.Tech.Sci.: 05.04.09 Ufa, 2000 128 p. RSL OD, 61:00-5/2014-X
  5. Komratov YUriy Sergeevich. Improvement of quality of hire on the basis of working out and research of new technical decisions: On example NTMK - 2000
    Improvement of quality of hire on the basis of working out and research of new technical decisions: On example NTMK: the thesis... A Cand.Tech.Sci.: 05.04.04. - Ekaterinburg, 2000.186 p.: silt. RSL OD, 61 01-5/1461-4
  6. Baranov Mihail Vladimirovich. Working out and research of new installation of continuous moulding and a strain for manufacture one-and multilayer sheet from nonferrous metals - 2000
    Working out and research of new installation of continuous moulding and a strain for manufacture one-and multilayer sheet from nonferrous metals: the thesis... A Cand.Tech.Sci.: 05.04.04. - Ekaterinburg, 2000.145 p.: silt. RSL OD, 61 01-5/1608-0
  7. Fetisov Valeriy Ivanovich. Working out of constructions of contact devices for massoobmennyh columns and research of efficiency of their operation - 2000
    Working out of constructions of contact devices for massoobmennyh columns and research of efficiency of their operation: the thesis... A Cand.Tech.Sci.: 05.04.09. - Ufa, 2000.163 p.: silt. RSL OD, 61 00-5/2948-1
  8. Hreys Montaser Husni Ibragim. Perfection of the jet assembly for machining prizabojnoj hole zones - 2000
    Perfection of the jet assembly for machining prizabojnoj hole zones: the dissertation... A Cand.Tech.Sci.: 05.04.07. - Ufa, 2000.128 p.: silt. RSL OD, 61 01-5/740-5
  9. Ershov YUriy Borisovich. Research of formation of chlorine-containing components of top internal gases and working out of methods of lowering of high-temperature corrosion of heating surfaces of coppers at burning of "salty" coals. - 1993
    Research of formation of chlorine-containing components of top internal gases and working out of methods of lowering of high-temperature corrosion of heating surfaces of coppers at burning of "salty" coals.: Dis.... A Cand.Tech.Sci.: 05.04.01 Moscow, 1993 176 p. RSL OD, 61:93-5/2379-8
  10. Donetc Kim Grigorevich. the Scientific and technological fundamentals of creation gidroprivodnyh jet installations for plants neftegazodobychi - 1992
    The scientific and technological fundamentals of creation gidroprivodnyh jet installations for plants neftegazodobychi: Dis.... Dr.Sci.Tech.: 05.04.07 Moscow, 1992 481 p. RSL OD, 71:94-5/44-7
  11. Stoyаnov Feliks Anatolevich. Computer-aided design of flowing parts of thermal turbines with optimum performances of profitability, static durability and vibrational reliability - 0000
    Computer-aided design of flowing parts of thermal turbines with optimum performances of profitability, static durability and vibrational reliability: silt RSL of OD 71:85-5/97
  12. Suhanov Aleksandr Igorevich. Aerodynamic excitation of oscillations of turbine vanes in a compressed nonstationary stream and perfecting of a method of calculation of variable loadings - 0000
    Aerodynamic excitation of oscillations of turbine vanes in a compressed nonstationary stream and perfecting of a method of calculation of variable loadings: silt RSL of OD 61:85-5/4713
  13. Seregin Valeriy Andreevich. Aerodynamic perfecting of valves of steam turbines for the purpose of lowering of losses of pressure in system parovpuska - 0000
    Aerodynamic perfecting of valves of steam turbines for the purpose of lowering of losses of pressure in system parovpuska: silt RSL of OD 61:85-5/1270
  14. SHevchenko Viktor Anatolevich. Aerodynamic perfecting of turbine steps, Insensitive to magnitude of a peripheral clearance - 0000
    Aerodynamic perfecting of turbine steps, insensitive to magnitude of a peripheral clearance: silt RSL of OD 61:85-5/1017
  15. Klebanov Mihail Davidovich. Influence ehksplutatcionnyh and efficiency factors on vibrational reliability of working vanes of steam turbines - 0000
    Influence ehksplutatcionnyh and efficiency factors on vibrational reliability of working vanes of steam turbines: silt RSL of OD 61:85-5/2604
  16. Dumnov Viktor Petrovich. Dynamics of a direct-flow head loop at the big disturbing effects with reference to starting conditions Direct-flow coppers - 0000
    Dynamics of a direct-flow head loop at the big disturbing effects with reference to starting conditions of direct-flow coppers: silt RSL of OD 61:85-5/2618
  17. Mandrika E.S.. the Dynamic component reliability valoprovoda power turbogenerators at sudden changes of loading - 0000
    S. The Dynamic component reliability valoprovoda power turbogenerators at sudden changes of loading: silt RSL of OD 61:85-5/1281
  18. Rabotaev Vladimir Grigorevich. Additional losses in steps of turbomachines and their measurement - 0000
    Additional losses in steps of turbomachines and their measurement: silt RSL of OD 61:85-5/880
  19. Lyubov Viktor Konstantinovich. Study of features of burning of large particles of natural fuel for the purpose of heightening of an overall performance of rotational fire chambers LPI - 0000
    Study of features of burning of large particles of natural fuel for the purpose of heightening of an overall performance of rotational fire chambers LPI: silt RSL of OD 61:85-5/1224
  20. Krilov Sergey Viktorovich. Research and working out of technological process of arc spot welding of bearing frame constructions in northern execution - 0000
    Research and working out of technological process of arc spot welding of bearing frame constructions in northern execution: silt RSL of OD 61:85-5/57
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -