<<
>>

informational-technological support of quality of autocomponents for maintenance of ideal management

The approach stated in section 2.3 to definition of making deviations allows to solve during APQP-design implementation two groups of problems:

- Straight line (design). Already at a stage of working out of operations was possiblly to predict magnitudes of a total deviation of figure of merit AK and to optimise parametres of transitions, and also to prove management plots for work stations.

- Return (analytical). Decision making about decrease of value of the measured deviation of key figure of merit AK by change of known significant making characteristics of process.

As much as possible productive (ideal) alternative of management offers to consider as separate figure of merit decrease of a significant deviation of a key parametre to demanded magnitude from the first trying at the minimum expenses of a time for planning of correcting acts (drawing 2.12) [17, 25].

The technique presented in section 2.3 provides presence of all information necessary for it. We will observe, as it is applicable in achievement of ideal result (drawing 2.12).

At reception of the replaceable task to the operator the control sheet which is made within the limits of a management current plan by key figure of merit (drawing 2.13) is given out. All significant lapses of the equipment in it should be already specified on the basis of diagnostic data. In the presence of technical possibility the control sheet can be formed on the electronic carrying agent.

As well as in the previous cases, the task for manufacturing of party of half stuff AK in operation with a legend «Op 010» begins with adjustment of technological system. The result is verified according to

Drawing 2.12 - Process of "ideal" management by a deviation of key figure of merit on a work station (a handheld computer - key figure of merit of an autocomponent, KH - control characteristics of process, About - the operator)

Drawing 2.13 - the Instance of control sheet for data collection


The confirmed technique of measurement of actual value of key figure of merit of the first suitable detail. In addition the set-up man is obliged to register in control sheet (drawing 2.13) actual values of control characteristics of adjustment.

In respect of management of operation formoobrazovanija periodicity of measurements is expedient for co-ordinating to cycles of change of tools. Besides, in addition to procedure of measurement of a handheld computer under plot SPC at each measurement it is necessary to display and analyse current values of significant control characteristics of process of interacting (drawing 2.12).

If at handheld computer measurement the significant deviation taking into account the registered values of parametres calculation of all making deviations is made is revealed. The next correction under the plot of reaction of the most significant KKH after ranging of these data is volplaned practically instantly. Correction is followed by result verification (drawing 2.12).

Unconditionally, at an early stage of a batch production it is is possible emersion of separate errors, but regular registration and the analysis of current data (including mathematical) allows to get out in the shortest terms on practically ideal alternative of management.

So, ideal management is attained at the expense of [17]:

- Completeness and adequacy of the demands which have been put in pawn at stages of preparation of manufacture;

- Presence of objective data on current values of a handheld computer and key control characteristics in the course of autocomponent exhaustion;

- Adequacy of empirical models of processes.

On a work station with use of the modern equipment already there are many possibilities to gain and operatively to analyse the current information for regulating so - to consider agency of variety of control characteristics. But the problem of management is much wider. It is passed round to all life cycle of the APQP-design and switches on still

Regular informing of the customer on extent of controllability process. For these purposes informational-technological support of quality of an autocomponent (ITSK) is offered to define a full complex of the information the term «: System of the documentary demands, given measurements,

Parametres of empirical dependences of processes of interacting,

The revealed significant deviations of all key figures of merit of an autocomponent providing decrease from the first trying, and proconsolidation of the information during performance of all aspects of works at stages of the design of preparation of manufacture, exhaustion and autocomponent deliveries »[16, 17, 20, 21].

Method of informational-technological support of quality of an autocomponent are incorporated processes of working out and application of informational-technological support of quality of an autocomponent by an interfunctional command of the supplier for modern quality management of an autocomponent.

2.5

<< | >>
A source: Biktimirova Guzel Fanisovna. WORKING out of the METHOD of informational-TECHNOLOGICAL SUPPORT of QUALITY of AUTOCOMPONENTS AT STAGES of PREPARATION of MANUFACTURE. The dissertation on competition of a scientific degree of a Cand.Tech.Sci. Moscow - 2017. 2017

More on topic informational-technological support of quality of autocomponents for maintenance of ideal management:

  1. the Informational support for quality management of autocomponents
  2. WORKING OUT OF PROCESS OF PREPARATION AND APPLICATION OF INFORMATIONAL-TECHNOLOGICAL SUPPORT OF QUALITY OF AUTOCOMPONENTS
  3. System of demands to informational-technological support of quality of autocomponents on work stations
  4. RESEARCH OF THE MODERN CONDITION OF THE INFORMATIONAL SUPPORT OF QUALITY MANAGEMENT OF AUTOCOMPONENTS OF DOMESTIC PRODUCERS
  5. Biktimirova Guzel Fanisovna. WORKING out of the METHOD of informational-TECHNOLOGICAL SUPPORT of QUALITY of AUTOCOMPONENTS AT STAGES of PREPARATION of MANUFACTURE. The dissertation on competition of a scientific degree of a Cand.Tech.Sci. Moscow - 2017, 2017
  6. Preparation of elements of informational-technological support of quality of an autocomponent at a development cycle of processes
  7. Structure of document circulation for informational-technological support of quality of an autocomponent
  8. Working out of elements of informational-technological support of quality at an autocomponent design stage
  9. 3.5. A complete set of forms of deeds of informational-technological support of quality of an autocomponent
  10. Application of informational-technological support of quality of an autocomponent at definitive preparation of manufacture and in a batch production
  11. WORKING OUT OF THE METHOD OF FORMATION OF INFORMATIONAL-TECHNOLOGICAL SUPPORT OF QUALITY OF THE AUTOCOMPONENT AT STAGES OF PREPARATION OF MANUFACTURE
  12. ALGORITHM OF THE ESTIMATION THE USER OF POSSIBILITIES OF THE SUPPLIER WITH APPLICATION OF INFORMATSIONNOYOTEHNOLOGICHESKY SUPPORT OF QUALITY OF AUTOCOMPONENTS
  13. Demands ISO/TS 16949:2009 to quality management of autocomponents
  14. Ordering of control characteristics informatsionnoyotehnologicheskogo supports of quality of autocomponents
  15. 2.1 Methodical approach to research of management by expenses for maintenance of quality of production
  16. influence of physicomechanical and himiko-technological properties of dry components of mixes on quality indicators of finished goods and criteria of an estimation of its quality
  17. 1.3 System approach to management of expenses for maintenance of quality of production
  18. informational-analytical model of the automated system of a support of decision-making on the basis of direct and return solving rules
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -