<<
>>

SECTION 4. WORKING OUT OF HARDWARE COMPONENTS FOR CONDUCTING OF MEASUREMENTS IN NATURAL CONDITIONS

The developed method of the operative control of parametres of the substance weighed in water, based on machining of facsimiles of water medium, has shown the working capacity. According to it, working out of the concept of the device which will allow to realise the given method at conducting of measurements in situ has been executed.

For the solution of this problem the following circuit design of conducting of experiments is supposed:

- The photoregistrar in the underwater case is fixed on the carrying agent, for example, as a part of a measuring complex «Ground station» [32] which is installed on a bottom (Drawing 4.1).

Drawing 4.1 - the Complex «Ground station», intended for performance

Natural researches in a shelf zone of the sea [32]

- With the set periodicity the photoregistrar makes record of images on the device of operative storage of the information and transfers data over the communication channel.

- Further by means of the software concentration and dimensional composition of corpuscles of a suspended matter is defined.

The photoregistrar applied as a part of the test-bed, owing to the technical features (necessity of work in svetoizolirovannom volume) and not leakproof design cannot be applied at conducting of measurements «in situ». According to it the functional diagramme and a design of the device-photoregistrar have been developed, allowing to gain instant images of medium and capable to work in natural conditions.

<< | >>
A source: ANTONENKOV DMITRY ALEKSANDROVICH. the OPTICAL METHOD of the OPERATIVE CONTROL of PARAMETERS of the SUBSTANCE of the BED LOAD WEIGHED In WATER. The dissertation on competition of a scientific degree of a Cand.Tech.Sci. Sevastopol, 2018. 2018

More on topic SECTION 4. WORKING OUT OF HARDWARE COMPONENTS FOR CONDUCTING OF MEASUREMENTS IN NATURAL CONDITIONS:

  1. 4.2.1 Hardware-software stand for conducting of tests
  2. TITOV Dmitry Vitalevich. WORKING out And RESEARCH of METHODS, ALGORITHMS And HARDWARE COMPONENTS of MACHINING SPEKTROZONALNYH of IMAGES. The dissertation on competition of a scientific degree of a Dr.Sci.Tech. Kursk - 2018, 2018
  3. Hardware implementation and a technique of conducting of experimental researches of the sensing transducer
  4. CHAPTER 1. SURVEY OF MODERN METHODS, ALGORITHMS AND HARDWARE COMPONENTS OF MACHINING SPEKTROZONALNYH OF IMAGES
  5. 4.3 Working out of metrology security of system of diagnosing of availability index of product of headlights of vehicles in conditions "passing light", "headlight" and «total light» at realisation of a standard method of measurements.
  6. research of process of hashing of components of a mix on a natural model
  7. the analysis of methods and machining hardware components spektrozonalnyh images. A condition and development trends spektrozonalnyh systems with multiple-unit radiation detectors
  8. 1.2 Working conditions of target mirrors and windows of powerful lasers; the factors influencing their working capacity
  9. the description of a natural model of the shower mixer for the visual analysis of character of movement of components of a mix
  10. CHAPTER 2. WORKING OUT OF THE MECHANISM OF CONDUCTING OF RESEARCHES UNDER SOLUTION postavlennh OF PROBLEMS AND OBJECT IN VIEW ACHIEVEMENT
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -