<<
>>

3.4.3. Means and the materials necessary for realisation of technological process

1 Processing of chinks is carried out with use of the standard equipment applied at usual acid treatment. For preparation, zakachki and procrushes of acid baths are used cementing aggregates and avtotsistserny.

2.

Reagents used in technology are issued in a commercial scale and are resolved to application in a petroleum industry.

3. The acid composition "Химеко-ТК-2" is issued according to technical specifications - 2458-063-17197708-01 in Joint-Stock Company "Himeko-GaNg" and represents

94 transparent solution from light yellow to brown colour, composition is applicable for heats (до120°С). A class of danger 3.

4. Muriatic acid ingibirovannaja СНПХ-HCI (technical specifications 2458-264 05765670-99). A class of danger 2.

Ammonium chloride, GOST 2210-73Е. Powdery substance, the maintenance of a main product 99,6, we will well dissolve in fresh and salt water (37,2 g/l at 20). A danger class - 4.

neftenol To - universal HAVING fallen for purification prizabojnoj zones and otmyva ASPO, we will combine with acids. Is issued by Joint-Stock Company "Himeko Ganges" under technical specifications 2483-065-17197708-2002. A danger class - 3.

<< | >>
A source: Kozhabergenov Murat Mokanovich. Substantiation of effective technologies doizvlechenija residual oil from obvodnennyh layers on an example of XIII horizon of deposit Uzen: Dis.... A Cand.Tech.Sci.: 25.00.17. - M: RGB, 2006. 2006

More on topic 3.4.3. Means and the materials necessary for realisation of technological process:

  1. Smiths Victor Georgievich. ALGORITHMIZATION And OPTIMIZATION of TECHNOLOGICAL PROCESS of RECTIFICATION of OIL. The DISSERTATION on competition of a scientific degree of a Cand.Tech.Sci. 05.13.06 - Automation and management of technological processes and productions (industry). Samara-2005, 2005
  2. Application of the equipment for air separation poroshkoobraznyh materials in technological systems of levigating
  3. 1. MATHEMATICAL MODELLING of TECHNOLOGICAL PROCESSES of DRYING of LOOSE MATERIALS
  4. TEHNIKO-TECHNOLOGICAL BREAKTHROUGH IN-PROCESS
  5. 3.3. Model of the integrated system of technological development and possibility of its realisation in Russia
  6. features of preparation of didactic materials for control means
  7. 4.2. Exploration of process of fusion of raw materials.
  8. 2.1. Materials legislative (pravotvorcheskogo) process
  9. 1.3 Identification of properties of raw materials and a process condition
  10. WORKING OUT OF PROCESS OF PREPARATION AND APPLICATION OF INFORMATIONAL-TECHNOLOGICAL SUPPORT OF QUALITY OF AUTOCOMPONENTS
  11. 7. The TECHNIQUE of ZONE CALCULATION MATERIAL Both the HEAT BALANCE of FUSION And EXPLORATION of INFLUENCE of TECHNOLOGICAL PARAMETERS ON PROCESS INDICATORS
  12. CHAPTER 4. EXPERIMENTAL RESEARCHES OF INFLUENCE OF IS CONSTRUCTIVE-TECHNOLOGICAL PARAMETERS OF THE PLANETARY MIXER ON EFFICIENCY OF PROCESS OF MIXING
  13. Use of process of a self-warming up for an estimate of a heat capacity of materials
  14. the Characteristic of technological process, a microclimate and labour activity of working women of shop on manufacture karbamidno - formaldehyde pitch (the basic group)
  15. results of experimental researches of influence of constructive and technological parametres of the shower mixer on quality indicators of process of mixing