<<

the BIBLIOGAFICHESKY LIST

Sergeys A.G.metrology security of maintenance of technical systems: Studies. The grant. M: Publishing house MGOU, 1994.

Sergeys A.G.exactitude and reliability of diagnostics of the car. M: Transport, 1980.

Sergeys A.G.metrology motor transport security.

M: Transport, 1988.

Sergeys A.G.calculation of functional tolerances on motor transport: Studies. The grant. VPI, Vladimir, 1984.80с.

Sergeev A.G., Latyshev M.V.Otsenka of losses by optimisation of exactitude and reliability of the diagnostic information.//the Measurement technology.-1992. - №9.

Sergeys A.G.metrology of the fundamentals of technical diagnostics of the car. Ryazan, Publishing house of the Ryazan radio engineering institute, 1976.

Sergeys A.G. About approximation of distribution of refusals of autotractor relays-regulators by law Vsjbulla. - the Autotractor electric equipment, 1967, №3.

Sergeev A.G., etc. Engineering applications of the law of distribution Twist - bulla. Vladimir, Publishing house of the Vladimir polytechnic institute, 1977.

Sergeys A.G.projection and a choice of electric elements of systems of automation. Ivanovo, izd. IEI, 1974.

Sergeys And. G, Latyshev M.V.Ekonomika of metrology security. Vladimir, 1996.

Sergeev A.G., IOrr V.E.Diagnostirovanie of a car electric equipment. M: Transport, 1987.

Harazov A.M., TSvid S.F.method of optimisation in technical diagnostics of cars. M: Transport, 1983.

Arinin I.N.technical diagnostics at the motor transport enterprises. Upper - the Volga book publishing house, 1974. 107. M.Lrinin I.N.diagnosing of availability index of product of the car. - M: Transport, 1978.

Arinin I.N., Sergeys M.P.Kompleksnyj the control of availability index of product of cars. The South Ural book publishing house, 1965.

Arinnn I.N., Chetin R. N. The analysis of availability index of product of buses. "Motor transport", 1967, №11.

Arinin I.N., Antipin V. K, Hachaturov S.E.line of the combined diagnostics of buses. "Motor transport", 1971, №4.

Arinin I.N.architecture of technical diagnostics at the motor transportation enterprise. Vladimir, TSNTI, 1970.

Mihlin V.M.Prognozirovanie of availability index of product of cars. M,

1976.

РД-332-400-323-017-86. Guiding on diagnostics of availability index of product of buses.

Position from maintenance service and repair of a rolling stock of motor transport. M, Transport, 1990.

Artemev B.G., Golubev S.M.handbook for workers of metrology services. M, 1990.

23.sychev E.I.metrology security of radio-electronic equipment. M: RITS'Tatjanin day ", 1994.

Evlanov L.G.control of dynamic systems. - M: the Science, 1972.

Borodachev N.A.core questions of the theory of exactitude of manufacture. M: Izd. AN the USSR, 1959.

Mihajlov A.V., Savin S.K.exactitude of radio-electronic devices. - M: Machine industry, 1976.

Mihajpov A.V.operation tolerances and reliability in radio-electronic equipment. - M: Owls. Radio, 1970.

Frumkin V. D, Rubichev N.A.probability theory and statistics in metrology and a measurement technology. - M: Machine industry, 1987.

Frumkin V. D, Rubichev N.A.reliability dopuskovogo quality assurance. - M: Standards Publishing House, 1990.

Reasonable V.M.Otsenka of parametres of the automatic control. M, Energy, 1975.

Rabinovich Of this year the Error of measurements.

JI., 1978.

32.0сновы maintenance of measuring apparatuses / Under the editorship of R.P.Pokrovskogo. M, 1984.

Novitsky P. V, Zoocount I.A.estimation of errors of results of measurements. JI., 1985.

Kreshchuk V.V. Metrologicheskoe security of maintenance of difficult articles. M, 1989.

Dunaev I.M.architecture of projection of systems of the technical control. M, 1981.

MU 109-85. Methods of an estimation of reliability of the control of articles of aviation technics. - M: Publishing house of standards, 1985.

37.0СТ 100433-81. Control devices of availability index of product of articles of aviation technics. A technique of definition of performances of tool reliability of the control.

Savin S.K.exactitude and working capacity of radio-electronic systems of flying machines. - M: Machine industry, 1986.

Savin S.K., Svintsov V. P, Hrytankov J1.M. Methods of an estimation of reliability of a control by measurement of difficult technical systems.//the Measurement technology. - 1992, - №4.

Savin S.K.sequential analysis of results of multiple measurements.//Metrologija.-1994. № 1.

Nikolsky V. N. Research of responsivity of performances of reliability of the control to change of parametres of a plant and a control device.//Metrologija.-1990 № 9.

Bolycheitsev the HELL, Vajhbrot E.I., Badalishev S.H., Bitchenko A.N.control of articles on the indirect magnitudes stochastically linked with controllable parametre.//Metrology.-1990. - №9.

Bolychentsev A.D., Vajhbrot E.I., Bitchenko A.N.control stochastically the linked magnitudes.//Measuring tehnika.-! 989. № 9.

Abramov O. V, etc. Tolerances and face values of control systems. - M: the Science, 1976.

Kizima S.V., Lapata J.V., Jurev V. F//Metrology.-1989. - №5.

Seryshev G. F. A method of definition of optimum areas of controllable parametres of articles of electronic technics.//the Electronic technics, quality management, standardization, metrology, trials.-1983. - №2.

Beletsky V.V. Optimalnyj synthesis of tolerances REA. Dep. №362 - D. M, 1971.

Kerr George A. Operational Influence on Avionics Reliability//Defence Management J.-1977. - Vol. 13, №4.

Himmelbau D.Prikladnoe nonlinear programming. - M: the World, 1975.

N.P.optimization's myth of exactitude of measurements in manufacture. - M: Izd - in standards, 1991.

Marks, Burdun. The fundamentals of metrology and the exactitude theory. M, "Higher school", 1985.

Gmurman V. E. Probability theory and the mathematical statistics. - studies. The grant for TECHNICAL COLLEGES. Izd. 5, the reslave. And dop. M, "Higher school", 1977.

Venttsel E. S, Ovcharov L.A.Teorija of casual processes and its engineering applications. M: "Science", 1991.

Nazarov N.G. Metrology. The basic concepts and mathematical models. M: "Higher school", 2002.

55. CHizhkov 10. P.Elektrooborudovanie of cars. A course of lectures. In 2 volumes M: Publishing house "Machine industry", 2003.

Bednarsky V.V. Maintenance service and car repairs. - the textbook. Izd 2. Rostov-on-Don: "Phoenix", 2005.

Titmouse. M. A, Yablonsky P.M.Ob of one model of service of technical plants by means of two monitoring systems.//the Basic questions of the theory and practice of nadezhnosti. th.: owls. Radio, 1975.

Ryzhakov V.V., Ryzhakov M. V, Ryzhakov K.V. Algorithms of measurement of quality of production and their performance.//the Measurement technology.-2003. - №5.

V.I.Metody's cocks of optimisation of the measuring information. Ryazan, Publishing house of the Ryazan radio engineering institute, 1972.

Korotkov V. P, Tajts B.A.Osnovy of metrology and the theory of exactitude of measuring devices. Standards Publishing House, 1978.

GOST 25478. Cars cargo and automobile, buses, lorry convoys. Safety requirements to availability index of product. Inspection methods.

GOST 25176. Diagnostics tools of cars, tractors, building and road cars. Classification. The common technical requirements.

GOST 24555. An order of certification of test equipment. General provisions.

GOST 21624-81 System of maintenance service and repair of automobile technics. Requirements to operation adaptability to manufacture and maintainability of articles.

GOST 26656. Technical diagnostics. Diagnosing indexes. kontroleprigodnost diagnosing plants. Security rules.

GOST 23434. Technical diagnostics. Diagnostics tools of system of ignition of carburettor drives. The common technical requirements.

GOST 8.508. Metrology performances of SI and tochnostnye performances of means of automation. The common methods of an estimation and the control.

GOST 8.401. GSI. Absolute consistencies of measuring apparatuses. The common requirements.

GOST 8.207. GSI. Direct method of measurements with multiple observations. Methods of handling of results of observations.

GOST 8.051. GSI. The errors supposed at measurement of the linear sizes from 1 to 500 mm.

GOST 8.009. GSI. Normalised metrology performances of measuring apparatuses.

GOST 1.25. GSI. Metrology security. General provisions.

GOST 28772. Systems of ignition of automobile drives. Terms and definitions.

GOST 28827. Systems of ignition of automobile drives. Test methods.

GOST 3940-84. An electric equipment autotractor. The common specifications.

GOST 9944-77. Starters the electric autotractor. The common specifications.

GOST 8.563 - 96. GSI. Techniques of execution of measurements. With changes.

GOST 51709-2001. Vehicles. Safety requirements to availability index of product and inspection methods.

RMG 43 - 2001. Application Guidings on expression of uncertainty of measurements.

GOST R ISO 5725 - 2002 Exactitude (correctness and pretsizionnost) methods and results of measurements. A part 1-6.

Generators for tractors and self-propelled agricultural cars. The common specifications.

GOST of 959-2002 Batteries accumulator rooms lead starternye for the autotractor technics. The common specifications.

Ryan, T.R. (1989). Statistical Methods for Quality Improvement. John Wiley and Sons, New York.

Wetherill, G.B. and D.W. Brown (1991). Statistical Process Control. Chapman and Hall, New York.

Nelson, W. (1982). Applied Life Data Analysis. Wiley, New York.

Fleming, T.R. and Harrington, D.P. (1981). A Class of Hypothesis Tests for One and Two Sample Censored Survival Data. Communications in Statistics, A10 (8):763-794.

Chambers, J.M., Cleveland, W.S., Kleiner, V, and Tukey, P.A. (1983). Graphical Methods for Data Analysis. Wadsworth, Belmont, CA.

88.Snedecor, G.W. and Cochran, W.G. (1980). Statistical Methods, 7th edition. Iowa State University Press, Ames, Iowa.

Fienberg, S.E. (1983). The Analysis of Cross-Classified Categorical Data, 2nd edition. The MIT Press, Cambridge, MA.

Bishop, Y.M.M. and Fienberg, SJ. and Holland, P.W. (1980). Discrete Multivariate Analysis: Theory and Practice. The MGG Press, Cambridge, MA.

Edwards, Don and Berry, Jack J. (1987), ' The efficiency of simulation-based multiple comparisons, "Biometrics 43,913-928.

Bechhofer, Robert E., Thomas J. Santner, and David M. Goldsman (1995). Design and Analysis of Experiments for Statistical Selection, Screening, and Multiple Comparisons. New York: Wiley.

Chambers, J.M. and Hastie, TJ. (1992). Statistical Models in S. Wadsworth and Brooks Cole Advanced Books and Software, Pacific Grove, CA.

Crowder, MJ. and Hand, DJ. (1990). Analysis of Repeated Measures. Chapman and Hall, London.

Daniel, C. (1976). Applications of Statistics to Industrial Experimentation. Wiley, New York.

Kennedy, WJ., Gentle, J?., (1980), Statistical Computing. Marcel Dekker, Inc., New York, p. 396.

Shabalin JU.V.synthes and the analysis of system of metrology security of production.//the Measurement technology.-1998. - №1.

Shabalin JU.V.method and algorithms of a choice of measuring apparatuses at synthesis of system of metrology security.//the Measurement technology. - 1998. - №3.

MI 1317-86. Results of measurements and performance of an error of measurements. Introducing shapes. Ways of use at trials of product samples and monitoring of their parametres.

Kuznstsov In And, Shabalin J.V., etc. the Fundamentals of maintenance of measuring apparatuses. - M: Radio and link, 1984.

"Elektronno-measuring pribory'usprav. - M: Vneshtorgizdat,

1991.

Ю2. Sergeev A.G., Sushchev AJC., Krohin V.V., Mishchenko Z.V.tehniko an economic estimation of a choice of controllable parametres of technical plants. A measurement technology, №3,1999, with. 13-15.

Latyshev, M.V.Otsenka of performances of reliability of systems of the indirect multiple parametre control of vehicles / M.V.Latyshev, 3. V.Mishchenko, G.I.Barashkov, K.S.Grishin (K.S.Isakova)//Problems of quality and maintenance of vehicles . Theses of the third international scientific and technical conference. 4.2. Penza. - 2004. - with. 268-271.

Latyshev, M.V.Upravlenie in performances of reliability of checking of means of technical diagnostics of vehicles of/m. V.Latyshev, 3. V.Mishchenko, K.S.Grishin (K.S.Isakova), G.I.Barashkov//Problems of quality and maintenance of vehicles . Theses of the third international scientific and technical conference. 4.2. Penza. - 2004. - with. 285-291.

Sergeys, And. G.Razrabotka of the generalised algorithm of calculation of performances of reliability of the direct multiple parametre control/and. G.Sergeev, 3. V.Mishchenko, K.S.Grishin (K.S.Isakova)//Physics and radio electronics in medicine and ecology. Reports of the sixth international it is scientific -

Technical conference.-Vladimir, 2004. - the Book 1.-With. 176-180. - ISBN 5-93907-014-0.

106. Latyshev, M.V.Otsenka of economic losses at indirect multiple parametre monitoring of technological processes / M.V.Latyshev, 3. V.Mishchenko, K.S.Grishin (K.S.Isakova)//Control of innovations and investment activity. Theses international scientific konfe - rentsii. - Vladimir, 2004. - With. 165 - 167.

Mishchenko, 3. V.Metodika of an estimation of reliability of systems of the indirect multiple parametre control of vehicles / 3. V.Mishchenko, K.S.Grishin (K.S.Isakova)//Actual problems of quality management of manufacture and maintenance of vehicles. Theses of the tenth international scientific and technical conference. - Vladimir, 2004. - With. 307-310. - ISBN 5-86953-135-7.

Mishchenko, 3. V.Otsenka of reliability of systems of the direct multiple parametre control of vehicles / 3. V.Mishchenko, K.S.Grishin (K.S.Isakova)//Actual problems of quality management of manufacture and maintenance of vehicles. Theses of the tenth international scientific and technical conference. - Vladimir, 2004. - With. 313-316. - ISBN 5-86953 135-7.

Mishchenko, 3. V.Razrabotka of a technique of a choice of means of technical diagnostics of vehicles by Neumann-Pirsona criterion / 3. V.Mishchenko, K.S.Grishin (K.S.Isakova)//Actual problems of quality management of manufacture and maintenance of vehicles. Theses of the tenth international scientific and technical conference. - Vladimir, 2004. - With. 310-313. - ISBN 5-86953 135-7.

Isakova, K.S.Razrabotka of a technique of statistical simulation for an estimation of parametres of reliability of the monitoring system of vehicles / Kira Isakova//Fundamental and application problems of perfecting of reciprocating engines. Theses of the tenth international scientific and technical conference. - Vladimir, 2005. - With. 129-130.

Mishchenko, 3. V.Sintez of metrology security of the monitoring system of a difficult technical plant in the conditions of a priori insufficiency of the information / 3. V.Mishchenko, K.S.Grishin (K.S.Isakova), N. V.Novozhilov, And. V.Sonin//Strategic alliances and clusters. Theses of the international conference. - Vladimir, 2005. - With. 188-189.

Mishchenko, 3. V.Optimizatsija of the single-stage plan of the control by technical and economic criterion at any law of distribution of values of controllable parametre / 3. V.Mishchenko, K.S.Grishin (K.S.Isakova), O.V.Antonova, And. V.Pronin//Strategic alliances and clusters. Theses of the international conference. - Vladimir, 2005. - With. 183 185.

Mishchenko, 3. V.Razrabotka of criterion of synthesis of metrology security of system of statistical regulation of technological process / 3. V.Mishchenko, K.S.Grishin (K.S.Isakova), N. V.Bahireva, N.A.Zajtseva//Strategic alliances and clusters. Theses of the international conference. - Vladimir, 2005. - With. 186-187.

Isakova, To. With. The modified criterion of efficiency of metrology security of maintenance of motor transportation means//to. S.Isakova, and. G.Sergeev//Motor industry. - 2007. № 7. - with. 25-29. ISSN 0005-2337.

<< |
A source: Isakova Kira Sergeevna. RESEARCH And PERFECTING of METROLOGY SECURITY of DIAGNOSING AT MAINTENANCE SERVICE And REPAIR of VEHICLES (ON the ELECTRIC EQUIPMENT EXAMPLE). The thesis on competition of a scientific degree of a Cand.Tech.Sci. A speciality motor transport 05.22.10-maintenance. Vladimir -. 2007

More on topic the BIBLIOGAFICHESKY LIST:

  1. the APPENDIX 1 Full list of the state posts according to the Summary list of the state posts
  2. THE LIST OF REDUCTIONS AND SYMBOLS
  3. the Contents list
  4. the List of reductions
  5. the contents list
  6. the Contents list
  7. the contents list
  8. the CONTENTS LIST
  9. THE CONTENTS LIST
  10. the contents list
  11. the CONTENTS LIST
  12. THE CONTENTS LIST
  13. the List of the used software
  14. THE CONTENTS LIST
  15. the contents list
  16. the Contents list
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, -knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -