<<
>>

4.1 Working out of algorithm for realisation of metrology security of the control and automatic telephone exchange diagnosing.

Values of controllable indexes are not that other.kak a casual vector which is characterised by a n-dimensional probability density fl (xi;...; x „), and, a function aspect f is known (is defined from consideration of conditions of maintenance and automatic telephone exchange manufacture, or by handling of statistical data), but each time the function aspect is the a priori information on controllable indexes.

Imitation of procedure of the control should display uniquely, whether there corresponds realisation of a vector to an effective article, and also decision-making by results of holding of measurement and to totals corresponding raschyo

tov error components =4Ki4t + dvlu +д ^. It is possible to present the given procedure in an aspect:

e And

K4j) =

0 «AND

(4.1)

6 I '; otf ™, «0 ';

Areas D and D ' can be n-dimensional parallelepipeds, i.e. And, < ?,• < Bj и А < А{ < $ < В/< В:

/ •I

(4.2)

p

Here//, and N, are set similarly (4.2)

(4.3)

Considering the entered designations, we have:

t ' 2

Л=1-

(4.4)

The algorithm exposition (fig. 4.1):

In the first block program start on execution is carried out

In the block 2 auxiliary variables 1 |, 12, are nulled, by a serial variable i is appropriated 1, where i=l..., n - element number in a vector of measurements of controllable parametre.

In blocks 3 and 4 values of controllable parametre and the basic measuring error taking into account the set distribution are shaped.

In blocks 5 and 6 values of additive and multiplicative components of an average quadratic aberration of a variation of the mean error are entered.

In blocks 7 and 8 values of absolute additive and multiplicative components of a variation of the mean error taking into account a quantile factor are calculated.

In the block 9 are evaluated a full absolute operation error for current value of controllable parametre

In the block 10 the operating time account is carried out at measurement of current value of controllable parametre

In the block 11 are defined magnitude of controllable parametre taking into account an operation error

9 In the block 12 values N () and h (x) are counted up

10. In the block 13 value of an auxiliary variable is calculated

l=H*h

Fig. 4.1. Algorithm of calculation of errors of the first and second sort at the direct multiple parametre control.

In the block 14 there is an accumulation of the information on a vector of the measured values of controllable parametres

In the block 15 there is an addition to a variable to I unit.

In the block 17 the condition of reaching of the end of a vector of the measured parametre values and if it is executed there is an evaluation is checked

Magnitudes of errors of the first and second sort in the block 16 for the given controllable parametre.

1

C ™ ED

11-0

12=0 0*0 I-yoyimn [

eip:

I U. t »A AT 2. 23

Fig. 4.4. Algorithm of calculation of criterion of optimisation of metrology security

On fig. 4.4 the algorithm of realisation of a technique is reduced tehniko -

Economic estimation of a choice of control devices on the COMPUTER. We will consider operations of the given algorithm.

1. Lead of input data:-for automatic telephone exchange - number of subsystems of automatic telephone exchange - R; - for each generalised index - p ^-for a variant of realisation of the monitoring system -

-For each controllable parametre Sa/, G, alh, and also data about laws of distribution of controllable parametre and an error izmere -

nija, i.e. a law aspect f (x) j, (p (Ax) j and

<< | >>
A source: Isakova Kira Sergeevna. RESEARCH And PERFECTING of METROLOGY SECURITY of DIAGNOSING AT MAINTENANCE SERVICE And REPAIR of VEHICLES (ON the ELECTRIC EQUIPMENT EXAMPLE). The thesis on competition of a scientific degree of a Cand.Tech.Sci. A speciality motor transport 05.22.10-maintenance. Vladimir -. 2007

More on topic 4.1 Working out of algorithm for realisation of metrology security of the control and automatic telephone exchange diagnosing.:

  1. 3.4. Research of influence of errors of definition of input data on magnitude of a confidence interval of criterion of efficiency of metrology security of diagnosing of availability index of product of automatic telephone exchange.
  2. CHAPTER 4. WORKING out And RESEARCH of ALGORITHM of METROLOGY SECURITY of the CONTROL And DIAGNOSING of AVAILABILITY INDEX OF PRODUCT of VEHICLES
  3. 1.1. The review of ways and methods of working out of metrology security of the control and diagnosing of availability index of product of vehicles.
  4. 4.2 Working out of metrology security of system of diagnosing of availability index of product of electric equipment LTS.
  5. 4.3 Working out of metrology security of system of diagnosing of availability index of product of headlights of vehicles in conditions "passing light", "headlight" and «total light» at realisation of a standard method of measurements.
  6. CHAPTER 2. WORKING out of the TECHNIQUE of OPTIMIZATION of METROLOGY SECURITY of DIAGNOSING of AVAILABILITY INDEX OF PRODUCT of VEHICLES.
  7. CHAPTER 1. THEORETICAL ASPECTS of METHODS of WORKING out of METROLOGY SECURITY of DIAGNOSING of AVAILABILITY INDEX OF PRODUCT of VEHICLES.
  8. Dynamics of the indexes influencing a consumption level fuel by kinds of automatic telephone exchange (data NTSI, the USA)
  9. 1.2. The analysis of metrology security of monitoring systems and diagnosing of difficult technical plants.
  10. 3.1. Research of influence of variation of the mean errors of values of controllable parametres on magnitudes of errors of the first and second sort at direct monitoring of availability index of product of automatic telephone exchange.
  11. CHAPTER 3. RESEARCH of the TECHNIQUE of HEIGHTENING of EFFICIENCY of METROLOGY SECURITY of DIAGNOSING of AVAILABILITY INDEX OF PRODUCT of VEHICLES
  12. Isakova Kira Sergeevna. RESEARCH And PERFECTING of METROLOGY SECURITY of DIAGNOSING AT MAINTENANCE SERVICE And REPAIR of VEHICLES (ON the ELECTRIC EQUIPMENT EXAMPLE). The thesis on competition of a scientific degree of a Cand.Tech.Sci. A speciality motor transport 05.22.10-maintenance. Vladimir -, 2007 2007
  13. 1.1. The General characteristic of standard base and powers of territorial establishments of Bank of Russia on exchange control realisation
  14. 2.3. Working out of a technique of an estimation of performances of reliability prn use of algorithms of diagnosing taking into account a methodical making error, a measuring error n a variation of the mean error.
  15. 3.3. Research of influence of position of fields of tolerances of values of controllable parametres, and also methodical and operation components of an error on magnitudesof errors of the first and second sort at use of algorithm of diagnosing.
  16. 2.2. Working out of a design procedure of tolerances at the indirect control taking into account influence of time of maintenance of vehicles, a variation of the mean error of measurement and completeness of the spent control.
  17. working out of an analysis algorithm of file JAEFP
  18. § 2. Legal regulation of activity of the credit organisations as agents of exchange control
  19. 2.2.1. Working out of algorithm of diagnostics of Malassezia-infections of animals.
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -