<<
>>

the major factors influencing properties of the interface полиимид/8іО2

The results received during modelling of properties of the interface poliimid/oksid of silicon with the modified and not modified surface, allow to assume, that the best integration nanochastits in a polyimide matrix should be realised in case of low values of density of an inoculation σ ~ 2 molek/nm2.

Concerning influence of chain length of the superficial modifier it is possible to draw a conclusion, that the increase in molecular weight of imparted chains, on the one hand, increases a zone of interdiffusion of contacting polymers, on the other hand, at great values nповерхностный the modifier starts to form the evolved phase. The last means, that pripoverhnostnyj bed from molecules the EXPERT will block access of chains of a matrix to a surface nanochastitsy, with which (as shown in podp. 4.3.3.2) they can form hydrogen bridges.

Thus, properties nanokompozita will be defined by interaction of two polymers. Because of strong distinction of solubility parametres of PE and PI in system there can be a macrophase division. It will inevitably lead to aggregation of LF and deterioration of properties nanokompozita. Similar processes are described for organo-clay nanokompozitov in case of modification of particles of clay by molecules surfaktantov
(surfaktanty with a single long chain yield good division nanochastits). At the same time with increase in length alkilnoj chains surfaktanta particle sorting degree falls [284; 317; 394]. It is displayed that at high degree of an inoculation nanochastitsy can aggregate even if they are modified by the polymer identical to a polymeric matrix. It occurs owing to that phase division reduces the free energy connected with the interface a superficial brush / a polymeric matrix [340; 344].

<< | >>
A source: Komarov Pavel Vyacheslavovich. MULTISCALE MODELLING NANODISPERSNYH of POLYMERIC SYSTEMS. The dissertation on competition of a scientific degree of the doctor of physical and mathematical sciences. Tver - 2014. 2014

More on topic the major factors influencing properties of the interface полиимид/8іО2:

  1. 2,3.2, Индикаторы определения экономической безопасности машиностроительного предl
  2. 4.3. Кадровый потенциал потребительской кооперации и тенденции его изменения
  3. 4.4. Формирование и управление имиджем высшего учебного заведения(региональный асп
  4. 3-5.2. Комплексная оценка экономической безопасности предприятия ОАО «КамГЭСэнергос
  5. 1.3. Формы нарушения и использования должностных полномочий и их коррупционный факт
  6. Глава З Особенности эпидемического процесса по туберкулезу и ВИЧ-инфекции в Калин
  7. 3.2. Анализ экономических и финансовых последствий льготирования НДПИ для МНК
  8. 5.1. Общиеподходы к управлению качеством образования
  9. Должны ли мы ликвидировать советские памятники?
  10. Б. Термодинамические преобразователи
  11. Объект и предмет исследования.
  12. Системный подход к управлению.
  13. Подсистема контроля и анализа качества подготовки специалистов.
  14. 4.1.3. Проблемы менеджмента в альтернативной энергетикеи пути их решения