<<
>>

YUdin Roman Viktorovich. Exploitation of conditions of the hydraulic vibrator of a press for increasing of physicomechanical properties of a dense wood. 2007

Exploitation of conditions of the hydraulic vibrator of a press for increasing of physicomechanical properties of a dense wood: the dissertation... A Cand.Tech.Sci.: 05.21.05. - Voronezh, 2007.181 p.: silt. RSL OD, 61 07-5/3607

<< | >>

Other dissertations on discipline Wood-knowledge, technology and the equipment tree-processings:

  1. Romashenko Viktor Viktorovich. Perfection of the equipment and process of processing of wood particle boards - 2009
    Perfection of the equipment and process of processing of wood particle boards: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Romashenko Victor Viktorovich; [a protection Place: Sib. gos. tehnol. Un y]. Krasnoyarsk, 2009.134 p.: silt. RSL OD, 61 09-5/1301
  2. CHekunin Dmitriy Borisovich. wood-polymeric materials with application kremnijorganicheskih mergences - 2008
    Wood-polymeric materials with application kremnijorganicheskih mergences: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Chekunin Dmitry Borisovich; [a protection Place: Mosk. gos. Un y timbers]. - Moscow, 2008. - 129 p.: silt. RSL OD, 61:08-5/1028
  3. YAkunkin Aleksandr Aleksandrovich. Wood particle board on a basis karbamidoformaldegidnyh of resins, The multifunctional acids modified by salts - 2008
    Wood particle boards on a basis karbamidoformaldegidnyh the resins modified by salts of multifunctional acids: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Jakunkin Alexander Aleksandrovich; [a protection Place: Mosk. gos. Un y timbers]. - Moscow, 2008. - 172 p.: silt. RSL OD, 61:08-5/1013
  4. Butakov Sergey Vladimirovich. the Substantiation of a pneumometric method of determination of volumes of timber - 2008
    A substantiation of a pneumometric method of determination of volumes of timber: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Butakov Sergey Vladimirovich; [a protection Place: the Archangel. gos. tehn. Un y]. Arkhangelsk, 2008.195 p.: silt. RSL OD, 61 08-5/1571
  5. Bizov Viktor Evgenevich. Increasing of a production efficiency of structural sawn timbers from small-sized saw logs - 2008
    Increasing of a production efficiency of structural sawn timbers from small-sized saw logs: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Byzov Victor Evgenevich; [a protection Place: the Archangel. gos. tehn. Un y]. Arkhangelsk, 2008.154 p.: Silt. RSL OD, 61 08-5/524
  6. Neradovskiy Denis Leonidovich. Exploitation of a technique and control devices of a condition of jar stability of the bases of a sawmill equipment - 2008
    Exploitation of a technique and control devices of a condition of jar stability of the bases of a sawmill equipment: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Neradovsky Denis Leonidovich; [a protection Place: the Archangel. gos. tehn. Un y]. - Arkhangelsk, 2008. - 150 p.: silt. RSL OD, 61:08-5/581
  7. SHarapov Evgeniy Sergeevich. Exploitation of technology of production of a sliced veneer from birch wood pumped - 2008
    Exploitation of technology of production of a sliced veneer from birch wood pumped: the dissertation. . A Cand.Tech.Sci.: 05.21.05 / Sharapov Evgenie Sergeevich; [a protection Place: the Archangel. gos. tehn. Un y]. - Arkhangelsk, 2008. - 154 p.: silt. RSL OD, 61:08-5/497
  8. Semenova Nadezhda Igorevna. the Cutting of wood materials in a thermomechanical field - 2008
    The Cutting of wood materials in a thermomechanical field: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Semenova Hope Igorevna; [a protection Place: S.-Peterb. gos. lesotehn. akad. It. S.M. Kirov]. St.-Petersburg, 2008.130 p.: silt. RSL OD, 61 09-5/406
  9. Hasanshin Ruslan Romelevich. the Convective drying of saw-timbers in thinned medium of the heat-carrier - 2007
    The Convective drying of saw-timbers in thinned medium of the heat-carrier: the dissertation... A Cand.Tech.Sci.: 05.17.08, 05.21.05 Kazan, 2007 213 p. RSL OD, 61:07-5/3080
  10. Ilyushenkov Leonid Vladimirovich. the Substantiation of an objective method of an estimation of an inclination of annual rings at cross-cut ends of saw-timbers - 2007
    A substantiation of an objective method of an estimation of an inclination of annual rings at cross-cut ends of saw-timbers: the dissertation. . A Cand.Tech.Sci.: 05.21.05 St.-Petersburg, 2007 172 p., Bibliogr.: p. 131-141 RSL OD, 61:07-5/4504
  11. Fomin Anatoliy Anatolevich. Exploitation and research resursosberegajushchej technology and the equipment for slab processing - 2007
    Exploitation and research resursosberegajushchej technology and the equipment for slab processing: the dissertation... A Cand.Tech.Sci.: 05.03.01, 05.21.05 Vladimir, 2007 187 p. RSL OD, 61:07-5/2685
  12. Kalinina Oksana Alekseevna. Technology of production of a colour compressed wood of mark "Destam" and research of its properties - 2007
    Technology of production of a colour compressed wood of mark "Destam" and research of its properties: the dissertation... A Cand.Tech.Sci.: 05.21.05 Voronezh, 2007 158 p. RSL OD, 61:07-5/3103
  13. Udachina Olga Aleksandrovna. the Drying schedule of saw-timbers without incipient humidifying of the treating medium for low power chambers - 2007
    Drying schedule of saw-timbers without incipient humidifying of the treating medium for low power chambers: the dissertation... A Cand.Tech.Sci.: 05.21.05 Krasnoyarsk, 2007 151 p., Bibliogr.: p. 137-146 RSL OD, 61:07-5/4272
  14. Bannikov Anatoliy Anatolevich. Increasing of accuracy of a wood sawing on deal band mills - 2007
    Increasing of accuracy of a wood sawing on deal band mills: the dissertation... A Cand.Tech.Sci.: 05.21.05 / Bannikov Anatoly Anatolevich; [a protection Place: the Archangel. gos. tehn. Un y]. Arkhangelsk, 2007.177 p.: silt. RSL OD, 61 07-5/5013
  15. Vorontcov Evgeniy Viktorovich. Beskalorifernye lesosushilnye chambers with utilisation of natural gas - 2006
    Beskalorifernye lesosushilnye chambers with utilisation of natural gas: Dis.... A Cand.Tech.Sci.: 05.21.05 Ekaterinburg, 2006 182 p. RSL OD, 61:06-5/2949
  16. Platonov Aleksey Dmitrievich. the Intensification of process of a wood drying trudnosohnushchih species - 2006
    An intensification of process of a wood drying trudnosohnushchih species: Dis.... Dr.Sci.Tech.: 05.21.05 Voronezh, 2006 280 p. RSL OD, 71:06-5/431
  17. Gerasimova Marina Mihaylovna. the Integrated utilisation of wood of the Siberian larch in production of export saw-timbers - 2006
    Integrated utilisation of wood of the Siberian larch in production of export saw-timbers: Dis.... A Cand.Tech.Sci.: 05.21.05 Krasnoyarsk, 2006 171 p. RSL OD, 61:06-5/2642
  18. Petuhov Sergey Vasilevich. the Substantiation of parametres of the mechanism of movement of hitch of cutting of disk saws - 2006
    Substantiation of parametres of the mechanism of movement of hitch of cutting of disk saws: Dis.... A Cand.Tech.Sci.: 05.21.05 Arkhangelsk, 2006 177 p. RSL OD, 61:06-5/2223
  19. Lapkaev Aleksey Grigorevich. Creation of safety and work normal conditions in woodwork processes under the dust factor - 2006
    Creation of safety and work normal conditions in woodwork processes under the dust factor: the dissertation... Dr.Sci.Tech.: 05.21.05 Krasnoyarsk, 2006 325 p. RSL OD, 71:07-5/374
  20. Sokolova Viktoriyа Aleksandrovna. Creation of decorative protective coatings of wood on the basis of acetylated vodno-dispersive paintwork materials - 2006
    Creation of decorative protective coatings of wood on the basis of acetylated vodno-dispersive paintwork materials: Dis.... A Cand.Tech.Sci.: 05.21.05 SPb., 2006 203 p. RSL OD, 61:06-5/2781
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -