Zabobin Valeriy Vasilevich. Experimental Research of characteristics of destruction of elements of designs from titanium alloy VT20 in the conditions of action of variable loads and the raised temperature. 0000

Experimental research of characteristics of destruction of elements of designs from titanium alloy VT20 in the conditions of action of variable loads and the raised temperature: silt RSL of OD 61:85-5/2354

<< | >>

Other dissertations on discipline Durability and thermal modes of flying machines:

  1. Tеyn U. Working out of the specified method of calculation of longitudinal oscillations elastic LA - 2008
    Razrabotka of the specified method of calculation of longitudinal oscillations elastic LA: the dissertation... A Cand.Tech.Sci.: 05.07.03 / Tehjn At; [a protection Place: Mosk. gos. tehn. Un y it. AD Bauman]. - Moscow, 2008. - 176 p.: silt. RSL OD, 61:08-5/1262
  2. Krer Muftah Mohamed Bulgasem. Identification zhestkostnyh characteristics of a design of A\C taking into account physical nonlinearity of a material - 2007
    Identification zhestkostnyh characteristics of a design of A\C taking into account physical nonlinearity of a material: dis.... A Cand.Tech.Sci.: 05.07.03 Kazan, 2007 120 p. RSL OD, 61:07-5/1929
  3. Zaytcev Sergey Eduardovich. Calculation of strength of configuration items of space-rocket engineering at casual non-stationary effects - 2007
    Calculation of strength of configuration items of space-rocket engineering at casual non-stationary effects: the dissertation... A Cand.Tech.Sci.: 05.07.03 Moscow, 2007 136 p., Bibliogr.: p. 111-116 RSL OD, 61:07-5/4403
  4. Pipopulo Andrey Vladimirovich. Research of strength properties and designing of shrouded blades of a turbine engine - 2006
    Research of strength properties and designing of shrouded blades of a turbine engine: Dis.... A Cand.Tech.Sci.: 05.07.03 Moscow, 2006 176 p. RSL OD, 61:06-5/2632
  5. Boyko Denis Vitalevich. Nonlinear deformation and stability of noncircular cylindrical shells - 2006
    Nonlinear deformation and stability of noncircular cylindrical shells: dis.... A Cand.Tech.Sci.: 05.07.03 Novosibirsk, 2006 221 p. RSL OD, 61:07-5/716
  6. Bugakov Igor Sergeevich. a settlement-experimental estimation of lift capability of multilayered composite designs of flight vehicles taking into account internal defects, Determined by a computer tomograph - 2006
    A settlement-experimental estimation of lift capability of multilayered composite designs of flight vehicles taking into account the internal defects determined by a computer tomograph: Dis.... A Cand.Tech.Sci.: 05.07.03 Kazan, 2006 171 p. RSL OD, 61:06-5/3630
  7. Semenov Vladimir Nikolaevich. Optimization of designs of planes of non-traditional shape on prochnostnym to criteria - 2006
    Optimisation of designs of planes of non-traditional shape on prochnostnym to criteria: the dissertation... Dr.Sci.Tech.: 05.07.03 / Mosk. gos. aviatc. In. - Zhukovsky, 2006.247 p.: silt. RSL OD, 71 07-5/581
  8. Kalmikov Aleksey Aleksandrovich. Dynamic models of a gyroplane and rationing of conditions of loading of a design - 2005
    Dynamic models of a gyroplane and rationing of conditions of loading of a design: Dis.... A Cand.Tech.Sci.: 05.07.03 Irkutsk, 2005 252 p. RSL OD, 61:05-5/3055
  9. Mishra Devashis. Research of temperature fields in industrial incubators - 2005
    Research of temperature fields in industrial incubators: the dissertation... A Cand.Tech.Sci.: 05.07.03, 05.26.02. - Moscow, 2005.131 p.: silt. RSL OD, 61 06-5/370
  10. Smotrova Svetlana Aleksandrovna. Working out of aviation models with use of polymeric materials for an aeroelasticity problem solving - 2005
    Working out of aviation models with use of polymeric materials for an aeroelasticity problem solving: Dis.... A Cand.Tech.Sci.: 05.07.03, 05.02.01 Zhukovsky, 2005 152 p. RSL OD, 61:06-5/1579
  11. Ustinov Georgiy Nikolaevich. Complex forecasting deformativnosti and strength of elements of a rotor vysokonagruzhennyh TNA ZhRD - 2004
    Complex forecasting deformativnosti and strength of elements of a rotor vysokonagruzhennyh TNA ZhRD: Dis.... A Cand.Tech.Sci.: 05.07.05, 05.07.03 Moscow, 2004 183 p. RSL OD, 61:05-5/482
  12. Horoshko Leonid Leonidovich. Modelling of process of magnitno-pulse assemblage of axisymmetrical metallo-composit designs of flight vehicles - 2004
    Modelling of process of magnitno-pulse assemblage of axisymmetrical metallo-composit designs of flight vehicles: Dis.... A Cand.Tech.Sci.: 05.07.03: Moscow, 2004 142 p. RSL OD, 61:04-5/2624
  13. Tyаgniy Anatoliy Vladimirovich. Definition of a state of stress and parametres of destruction thin-walled bonded and kleeklepanyh elements of air designs with cracks - 2004
    Definition of a state of stress and parametres of destruction thin-walled bonded and kleeklepanyh elements of air designs with cracks: Dis.... A Cand.Tech.Sci.: 05.07.03: Novosibirsk, 2004 123 p. RSL OD, 61:05-5/581
  14. Plaksin Sergey Viktorovich. Forecasting of strength of air designs with mechanical fixture a method of the integrated equations - 2004
    Forecasting of strength of air designs with mechanical fixture a method of the integrated equations: Dis.... A Cand.Tech.Sci.: 05.07.03: Novosibirsk, 2004 119 p. RSL OD, 61:04-5/2888
  15. Guan SHivеy. Designing of optimum bulky three-layer curvilinear designs with maintenance of the set level of the minimum movings - 2004
    Designing of optimum bulky three-layer curvilinear designs with maintenance of the set level of the minimum movings: Dis.... A Cand.Tech.Sci.: 05.07.03, 05.07.02: Moscow, 2004 126 p. RSL OD, 61:05-5/1898
  16. Galchenko Evgeniy Vitalievich. Influence of sequence of loading of air designs at two stages of weariness at identical integrated characteristics nagruzhennosti - 2003
    Influence of sequence of loading of air designs at two stages of weariness at identical integrated characteristics nagruzhennosti: Dis.... A Cand.Tech.Sci.: 05.07.03: Zhukovsky, 2003 104 p. RSL OD, 61:04-5/2355
  17. Belousov Anatoliy Ivanovich. Influence of structural flexibility of a flight vehicle on reproduction of variable loadings at strength tests - 2003
    Influence of structural flexibility of a flight vehicle on reproduction of variable loadings at strength tests: Dis.... A Cand.Tech.Sci.: 05.07.03: Novosibirsk, 2003 147 p. RSL OD, 61:04-5/2007
  18. Polintcev Oleg Evgenevich. Dynamics and strength of an autorotating rotor - 2003
    Dynamics and strength of an autorotating rotor: Dis.... A Cand.Tech.Sci.: 05.07.03: Irkutsk, 2003 279 p. RSL OD, 61:04-5/615-6
  19. Bubnov Vladimir Igorevich. Complex forecasting of the thermointense and deformed condition of elements of designs of rocket engines and power installations - 2003
    Complex forecasting of the thermointense and deformed condition of elements of designs of rocket engines and power installations: Dis.... A Cand.Tech.Sci.: 05.07.05, 05.07.03 Moscow, 2003 104 p. RSL OD, 61:04-5/1730
  20. Vissarionov Ilyа Stanislavovich. Working out of a technique of maintenance of life cycle of a primary structure of an airplane - 2003
    Working out of a technique of maintenance of life cycle of a primary structure of an airplane: Dis.... A Cand.Tech.Sci.: 05.07.03: Moscow, 2003 188 p. RSL OD, 61:04-0/72
- Acoustic devices and systems - Aerials, OHF devices and their technologies - Aerodynamics and processes of heat exchange of flying machines - Automation and management of technological processes and manufactures (on branches) - Aviation and space-rocket technics - Bases and the bases, underground constructions - Biotechnology of foodstuff (on branches) - Building - Building designs, buildings and constructions - Building materials and products - Building mechanics - Cars, motor industry - Chemical technology of fuel and high-energy substances - Chemistry technology - Computer science, computer facilities and management - Computers and systems - Control and test of flying machines and their systems - Designing and a design of courts - Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels - Designing, a design and manufacture of flying machines - Devices and a quality monitoring of an environment, substances, materials and products - Devices and measurement methods by kinds of measurements - Devices and methods for measurement of an ionising radiation and x-ray devices - Devices and methods of transformation of images and a sound - Devices, systems and products of medical appointment - Document-knowledge, архив-knowledge - Documentary information - Durability and thermal modes of flying machines - Dynamics, ballistics, traffic control of flying machines - Electrical engineer - Electromecanics and electric devices - Electronics - Electrotechnical complexes and systems - Electrotechnical materials and products - Electrotechnologies and an electric equipment in agriculture - Electrotechnology - Elements and devices of computer facilities and control systems - Energy devices on the basis of renewed kinds of energy - Engineering geometry and computer drawing - Engineering geometry and computer drawing - Engineering technology - Fire and industrial safety (on branches) - Foundry manufacture - Friction and deterioration in machines - Goodsknowing foodstuff and technology of products of public catering - Goodsknowing the industrial goods and light industry raw materials - Heat supply, ventilation, an air conditioning, gas supply and illumination - Hromatogrophy and Hromatogrophyses devices - Hydraulic engineering building - Hydraulic machines and Hydropneumaticunits - Hydraulics and an engineering hydrology - Industrial fishery - Industrial power system - Information systems and processes, legal aspects of computer science - Information-measuring and operating systems (on branches) - Instrument making, metrology both information-measuring devices and systems - Knowing machines, systems of drives and a detail of machines - Labour safety (on branches) - Land complexes, the starting equipment, operation of flying machines - Library science and bibliology - Light engineering - Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support - Machines, units and processes (on branches) - Management in social and economic systems - Management of processes of transportations - Manufacture Organization (on branches) - Materials Science - Materials technology (on branches) - Materials technology of manufactures textile and light industry - Mathematical and software of computers, complexes and computer networks - Mathematical modelling, numerical methods and complexes of programs - Mechanical engineering and knowing machines - Membranes and membraneses technology - Metallurgical science and thermal processing of metals - Metallurgy - Metallurgy of black, colour and rare metals - Metallurgy of technogenic and secondary resources - Methods and systems of protection of the information, информационня safety - Metrology and metrological maintenance - Motor transport Operation - Mountain machines - Navigation and an air traffic control - Navigation Devices - Nuclear and radiating safety - Nuclear power installations, including designing, operation and a conclusion from operation - Nuclear reactor building, machines, units and technology of materials of the nuclear industry - Operation of air transport - Optical both optiko-electronic devices and complexes - Physical fields of the ship, ocean, atmosphere and their interaction - Powder metallurgy and composite materials - Power - Power electronics - Power plants and power systems - Power systems and complexes - Power, metallurgical and chemical mechanical engineering - Processes and devices of chemical technologies - Processes and devices of food manufactures - Processes and machines of agroengineering systems - Processing of constructional materials in mechanical engineering - Processing of metals by pressure - Quality monitoring and diagnostics in mechanical engineering - Quantum electronics - Radar-location and radio navigation - Radio engineering and communication - Radio engineering, including systems and TV devices - Radio measuring devices - Road, building and hoisting-and-transport machines - Robots, mechatroniks and roboticses systems - Rolling stock of railways, draught of trains and electrician - Safety in extreme situations (on branches) - Safety of activity of the person - Sailing charter Operation, navigation - Ship power installations and their elements (main and auxiliary) - Shipbuilding - Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects - Standardization and product quality control - System analysis, management and information processing (on branches) - Systems of automation of designing (on branches) - Systems, networks and devices of telecommunications - Technical aesthetics and design - Technical science - Technics of high pressure - Technologies and machines of processing by pressure - Technologies and machines Weldining manufactures - Technologies and maintenance service means in agriculture - Technologies and means of mechanisation of agriculture - Technology and building organisation - Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics - Technology and a preprocessing of textile materials and raw materials - Technology and machines of timber cuttings and a forestry - Technology and processing of polymers and composites - Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry - Technology and the equipment of mechanical and physicotechnical processing - Technology of a skin and fur - Technology of electrochemical processes and protection against corrosion - Technology of fats, essence and perfumery-cosmetic products - Technology of food products - Technology of garments - Technology of inorganic substances - Technology of instrument making - Technology of materials and products textile and light industry - Technology of meat, dairy and fish products and refrigerating manufactures - Technology of mechanical engineering - Technology of organic substances - Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing - Technology of rare, absent-minded and radioactive elements - Technology of shipbuilding, ship repair and organisation of ship-building manufacture - Technology of shoe and kozhevenno-notions products - Technology of silicate and refractory nonmetallic materials - Technology of sugar and sugary products - Technology of tea, tobacco and biologically active substances and subtropical cultures - Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree - Telecommunication systems and computer networks - Theoretical bases of computer science - Theoretical the electrical engineer - Theory of mechanisms and machines - Theory of the ship and building mechanics - Thermal engines - Thermal power plants, their power systems and units - Thermal, electrorocket engines and energydevice flying machines - Track, research and designing of railways - Transport - Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport - Transport, mountain and building mechanical engineering - Turbomachines and combined turbounits - Vacuum and plasma electronics - Vacuum, compressor technics and pneumatic systems - Water supply, water drain, building systems of protection of water resources - Waterways of the message and hydrography - Wheel and tracklaying vehicles - Wood-knowledge, technology and the equipment tree-processings -